512565

Navman Tracker 5430 Manual

29
Zoom out
Zoom in
Previous page
1/44
Next page
29
TRACKER 5430/5430i Installation and Operation Manual
NAVMAN
Map datum and map shift
Satellite derived positions on the TRACKER
are based on a worldwide reference (datum)
known as WGS84. Most paper charts are based
on WGS84. However, some paper charts are
not based on WGS84, which results in an offset
between a position on the TRACKER and the
same position plotted on the paper chart.
To match the TRACKER’s positions with a local
chart that is not based on WGS84:
Either select Map datum and select the datum
for the local chart. See appendix A for a list of
the available datums. WGS84 is the default
datum, and the datum most commonly used
on paper charts.
Or, if the correct datum is not available, retain
the WGS84 datum and apply a map shift.
(see below).
NMEA datum off set
If you select a map datum other than WGS 84,
the map datum offset can be applied to latitude
and longitude coordinates sent on the TRACKER
NMEA output:
Off: Latitude and longitude coordinates
displayed on any NMEA repeater do not
match the coordinates on the TRACKER.
Latitude and longitude coordinates
broadcast on any NMEA VHF transmitter
will be the same as the coordinates on a
WGS 84 chart.
On: Latitude and longitude coordinates
displayed on any NMEA repeaters match
the coordinates on the TRACKER. However,
latitude and longitude coordinates broadcast
on any NMEA VHF transmitter will be slightly
offset from coordinates on a WGS 84 chart.
Map shift
Map shift is a correction applied to the TRACKER’s
positions so that they match a chart’s positions.
Warning: Map shift is for eliminating
minor offsets. It should not be used if the
correct datum is available. Use map shift
with caution: incorrect application will cause
incorrect boat positions.
Set map shift
1 Move the boat to a known point on the chart,
for example a marina berth.
2 In the Chart setup menu, select Map shift.
3 Move the cursor to the position on the chart
where the boat actually is.
4 Press ENT to set the new map shift. The boat
will now be displayed at its actual location.
Clear map shift
Clearing the map shift removes any map shift
from the TRACKER’s positions.
1 In the Chart setup menu, select Map shift.
2 Press MENU and select Clear.
Waypoints
Controls how waypoints are displayed on the
chart. The options are:
Hide all: No waypoints are displayed. (
except for waypoints on any selected route).
Show all: All waypoints are displayed.
Selected: Waypoints with their display
option set to Icon or I+N (Icon and Name) are
displayed (see section 9).
Chart display options
The other chart setup options allow an extensive
range of chart card features to be shown.
Configure the most useful display format.
Bathymetric Lines and soundings
Chart cards contain a large amount of spot
sounding and depth contour data. This can be
selectively displayed by turning Bathymetric
Lines and Spot Soundings on, then selecting
the range to display with Bath and Sndgs Min
and Max.
Attention Areas
Areas of importance, such as restricted
anchorages and shallow areas, are highlighted as
Attention Areas. The options are:
On: displays attention area boundaries and
information icons
.
Off: does not display attention area
boundaries or information icons
.
Note: In some early chart cards the information
icons
are inactive.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Tracker 5430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Tracker 5430 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Tracker 5430

Navman Tracker 5430 User Manual - German - 45 pages

Navman Tracker 5430 User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info