512565
21
Zoom out
Zoom in
Previous page
1/44
Next page
21
TRACKER 5430/5430i Installation and Operation Manual
NAVMAN
To go to the waypoints display, press DISP and
select Waypoints (see right).
The waypoints display is a list of the waypoints
that have been entered, each with waypoint
symbol, name, latitude and longitude, distance
and bearing from the boat, type and display
option.
9-2 Managing waypoints
Warning: Do not create a navigation
waypoint on land or in dangerous water.
9-2-1 Creating a new waypoint
Creating and editing a new waypoint from
the chart display
1 To create a waypoint at the boat position,
press ESC to centre on the boat.
To create a waypoint at a different point,
move the cursor to that point on the chart.
2 Press ENT and select save, or press MENU
and select New waypoint.
3 A new waypoint, with the default name and
data is created.
4 Change the waypoint data if necessary (see
section 9-2-7). Select Save.
Creating a new waypoint from any display
Press ESC on any display to switch to the chart.
Follow the steps as described above.
To change the default data, (see section 9-2-3).
Note: If a GPS fix hasn't been acquired, a waypoint
will be created at the cursor position instead of the
boat position.
Creating a new waypoint from the waypoints
display
1 In the waypoints display, press MENU and
select Create.
2 A new waypoint, with a default name and
data, is created at the boat position.
3 Change the waypoint data if necessary (see
section 9-2-7). Select Save.
Note: Waypoints can also be created when a route
is created (see section 10-2-1).
9-1 Waypoints display
If there are many waypoints, use this feature
to select which waypoints are displayed on
the chart.
Note: the other choices for the “Waypoints
setup option are “Hide all” (no waypoints are
displayed on the chart) and “Show all” (all the
waypoints are displayed on the chart) (see
section 13-2).
9-2-2 Moving a waypoint
Moving a waypoint from the chart display
1 In the chart display, move the cursor to the
waypoint to move.
2 Press MENU and select Move.
3 Move the cursor to the new position and
press ENT.
Moving a waypoint from the waypoints
display
To move a waypoint from the waypoints display,
edit the waypoint (see section 9-2-3) and change
the latitude and longitude.
9-2-3 Editing a waypoint
Editing a waypoint from the chart display
1 In the chart display, move the cursor to the
waypoint to edit.
2 Press MENU and select Edit.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Tracker 5430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Tracker 5430 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Tracker 5430

Navman Tracker 5430 User Manual - German - 45 pages

Navman Tracker 5430 User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info