9
SPiN 100 | User Manual
Getting started
4. Starting SPiN 100
By now, you have installed SPiN 100 on your Pocket PC and, if required, mounted your GPS receiver
in your vehicle. You are now ready to start SPiN 100 and ensure that your Pocket PC and GPS receiver
are communicating successfully.
1. Close all open programs on your Pocket PC to provide memory resources for SPiN 100.
Note: Tapping or in the top right corner of an application does not usually close the
application, but leaves it running in the background. To close SPiN 100 tap and hold a point on the
screen to display the Pop-up Menu, then select Exit Application. To close all applications, see your
Pocket PC manual.
2. Tap Start (a) to display the Start menu (see Figure 1).
3. Tap Programs (b) on the Start menu.
4. Tap
(c) on the Programs screen (see Figure 2).
SPiN 100 will open.
5. The Legal Notice screen will display. Read the legal notice and tap I Agree to confirm you understand.
6. The Tutorial will display. Tap
to move through the screens.
Note: To switch off the Tutorial, from the Main Menu tap , then Setup, then the General tab. In
the Tutorial section of the General screen, tap the Show at Startup checkbox to deselect it
.
The 2D Map screen will open and the status bar at the bottom of the screen will either display
your present location (if a GPS fix has already been obtained) or the current GPS status. Tapping
the status bar will open the GPS Status screen.
You are now ready to obtain a GPS fix. See GPS Setup on page 11.
a
b
c
Figure 1. Start Menu
Figure 2. Programs Screen
