27693
12
Zoom out
Zoom in
Previous page
1/69
Next page
Quick Start Guide
12
PiN Pocket PC 300 | Quick Start Guide
Positioning Your PiN in a
Vehicle
Before you begin, check if your vehicle is tted with a heat-reecting or heated windshield. If so,
you will need to purchase an external antenna for your PiN to receive GPS signals.
There are several ways to position your PiN in a vehicle. Follow these instructions carefully.
• Do not place your PiN in a position that obstructs the driver’s view, or interferes with the
operation of air-bags or other vehicle safety equipment.
• For security and to avoid overheating, do not leave your PiN in an unattended vehicle,
especially in strong sunlight.
• Do not use or handle your PiN when it is hot — leave it to cool out of direct sunlight.
Windshield Suction Mount
You can position your PiN on the inside of your vehicle windshield using the PDA windshield
suction mount and PDA cradle:
1. Attach the PDA cradle to the PDA windshield suction mount by inserting the four tabs at
the end of the suction mount arm in the four slots on the cradle. Ensure that the Close
arrow on the suction mount is pointed toward the top end of the cradle.
2. Find a suitable position on your windscreen where the PDA will be clearly visible by the
driver.
Warning: Do not mount your PiN in a way that interferes with airbags or other safety
equipment.
3. Clean and dry the suction cup and the windshield. Do not touch either area after it is
cleaned.
4. Press the suction cup rmly to the window, then push the lever toward the window.
5. Extend the GPS receiver into a horizontal position and slide your PiN into the PDA
cradle.
6. Bend the arm of the suction mount so that the PiN will be clearly visible to the driver.
7. Plug the vehicle power adapter into the socket on the bottom of your PiN and the other
end into the vehicle lighter socket.
To remove the PDA windshield suction mount from the windshield, pull the lever away from the
window and gently lift the tab on the rim of the suction cup.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman PiN300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman PiN300 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info