512549
6
Zoom out
Zoom in
Previous page
1/19
Next page
6
NAVMAN
MULTI 3100 Installation and Operation Manual
2-1 Turn on and off
Turn the unit on and off with the auxiliary power switch
on the boat. The unit does not have its own power
switch. When you turn it off, any settings you have
made are retained.
If the word SIM flashes at the bottom, right of the
display, then the unit is in simulate mode (see
section 2-5).
2-2 Basic operation
The keys
The unit has four keys, labelled and .
In this manual:
Press means to push the key for less than one
second.
Hold for two seconds means to hold the key
down for two seconds or more.
Press one key + another key means to push
both keys together.
Set backlight level for screen and keys
You can set the backlight to one of four brightness
levels or off. Press
once to display the current
backlight level, press again to change the level:
Change the items displayed
The display can show two values at once, one in the
top part of the screen and one in the bottom. If an
item displays as dashes (— —) then it means that
the value is outside the range, for example the depth
might be too deep or unknown.
To change what is displayed in the top part of the
screen, press one or more times to select:
Speed.
Avg speed.
Max speed.
Trim speed.
Depth.
Temperature.
To change the value displayed in the bottom part of
the screen, press
one or more times to select:
Speed.
Depth.
Trip log (distance).
Total log (distance).
Battery voltage.
Countdown timer.
2-3 Change units
To change the speed and log units, press
until SPEED is displayed, then hold until the
units change; if necessary, hold again until
the units change again.
To change the depth units, press until
DEPTH is displayed, then hold until the
units change; if necessary, hold until the
units change again.
To change the temperature units, press
until the temperature is displayed, then hold
until the units change.
2-4 Alarms
The MULTI 3100 can be set to sound an alarm when
the water is too deep or too shallow (see sections
5-2 and 5-3). When the alarm sounds, the internal
beeper sounds, the symbol on the display flashes
and any external beepers or lights operate.
Press
to mute the alarm. The alarm stays muted
until the depth becomes returns to the pre-alarm
condition or is within the alarm parameters. The
alarm will sound if the depth becomes too deep or
too shallow again.
2-5 Simulate mode
Simulate mode allows you to become familiar with
the unit off the water. In Simulate mode, the MULTI
3100 functions normally except that the transducers
are ignored and the unit generates this data internally.
The word SIMULATE flashes at the bottom, right
corner of the screen.
To turn Simulate mode on or off:
1 Turn the power off.
2 Hold down while you turn the power on.
2 Operation
Backlight
Level 2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Multi 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Multi 3100 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Multi 3100

Navman Multi 3100 User Manual - German - 18 pages

Navman Multi 3100 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info