663843
7
Zoom out
Zoom in
Previous page
1/19
Next page
Installing the M-Nav 900/950
Refer to the Garmin manual for instructions on assembling the
docking cradle and windscreen mount, and installing the unit in
the vehicle.
Attaching the Docking Cradle to the Windshield
NOTE
Some windshields contain areas of tinted glass that may inter-
fere with the GPS signal. Do not mount the M-Nav 900/950 in
these areas.
1. Connect the magnetic mount to the suction cup by firmly
pressing the socket on the mount of the ball on the suc-
tion cup arm.
2. Decide where to locate the suction mount on the wind-
shield. Use an alcohol swab to thoroughly clean that area
of the windshield, then dry the area with a soft, lint-free
cloth.
3. Press the suction cup firmly against the windshield for 3
seconds.
4. Push the lever down to vacuum-seal the suction cup to
the windshield.
Now you are ready to add the M-Nav 900/950 to the docking
cradle.
Adding the M-Nav 900/950 to the Docking Cradle
IMPORTANT
The M-Nav 900/950 must be in the docking cradle and con-
nected to the Qube tracking device in order for you to report
your driver status, send and receive messages, and oth-
erwise communicate with your fleet administrator through
the OnlineAVL2 application. The start-up screen will display
automatically.
The M-Nav 900/950 attaches magnetically to the cradle. Simply
align the unit with the cradle in the center of the back face and
when the M-Nav and cradle are close enough, the magnets will
snap the two together. The magnets are positioned to prevent
the M-Nav being attached in the wrong position. If you feel res-
istance, check that the cradle is correctly oriented (the word
Garmin” should appear the right way up) and the M-Nav is in
landscape orientation (also with the word Garmin” should
appear the right way up).
M-Nav 900/950 | User Guide
NOTE
The M-Nav 900/950 will charge only when connected to a
Qube tracking device in a standard vehicle installation, or
when using an AC adaptor supply. It will not charge effect-
ively when connected to a standard USB connection through
a PC or similar and powered on.
Getting Started
Disclaimer and Warning Screens
After a factory reset, you will be asked to accept the Garmin and
associated software end user license agreements. It is necessary
to scroll down to the bottom of the page before pressing Accept
All.
The "Warning" screen is displayed automatically. If you accept
the warnings, select Agree.
If your device is an M-Nav 950 (Garmin 670) you will be warned
about the navigation mode (truck vs. car) and offered the oppor-
tunity to switch mode. If you wish to use the truck-specific rout-
ing features, press Switch Mode and then select Truck/Lorry.
If the main menu is displayed, your M-Nav is ready to use. The
number of icons displayed in the main menu depends on the fea-
tures that have been enabled by your fleet administrator.
NOTE
If a different screen is displayed instead of the main menu,
see the next section.
Driver Log In & Status
The following screens will only be displayed if your fleet admin-
istrator has set up the Driver Login and Driver Status functions in
4
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman M-Nav 950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman M-Nav 950 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info