Manual Navman iCN650 (page 12 of 88) (English, Dutch, Spanish)

25579

Zoom out

Zoom in

1/88

iCN 600 series | User Manual

Getting started

Adhesive Tape and Screw-Mount*

You can use the baseplate, adhesive tape and screws supplied to permanently mount the iCN

directly into the vehicle dashboard.

Note: This is a permanent solution. Once fixed, the adhesive tape cannot be removed.

*iCN 630, 635, 650 only

Assembling the iCN Screw-Mount

1. Choose a position on the dashboard where the iCN will be clearly visible to the driver,

and ensure that the mounting surface is clean and dry.

2. Remove the protective layer from the tape and press down ﬁrmly for 30 seconds.

3. Press the suction-cup ﬁrmly against the surface and press the lever down.

4. Use the baseplate and screws supplied to ﬁx the iCN base into the dashboard.

5. Slip the locking-nut over the ballfoot, with the ﬂat side facing upwards.

6. Snap the socket-clip onto the ballfoot.

7. Screw the locking-nut onto the thread of the socket-clip until ﬁrm.

Inserting the iCN into the Screw-Mount

1. Snap the iCN onto the socket-clip. Position the two locating-tabs on the underside of the

iCN into the corresponding slots on the socket-clip. Then push the iCN into the clip.

2. Open the GPS antenna outwards, so it has a clear view of the sky.

3. Plug the power-cable into the socket on the left side of the iCN and the other end into

the 12 V vehicle power-socket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Navman iCN650 in the language / languages: English, Dutch, Spanish as an attachment in your email.

The manual is 3,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Navman iCN650 Manual

Product: