663849
26
Zoom out
Zoom in
Previous page
1/32
Next page
G-PILOT 3380 System Installation Manual NAVMAN 27
Note
To exit the calibration at any time, press ESC.
If the boat is not turned as prompted or the compass is not working then calibration can not be com-
pleted, the G-PILOT 3380 system displays an error. Press ESC, fix the problem and repeat the calibration.
Local disturbances in magnetic field may affect the compass. Calibration must be preformed away from
large metal structures such as marinas, large ships etc.; this is the responsibility of the user.
Ensure that both sources are referencing the same north (true or magnetic). If your magnetic compass
has not been calibrated then you can use another source for heading. If using vessel’s compass then
ensure that the deviation tables are applied to check the autoG-PILOT’s compass.
To calibrate the Compass unit go to Compass in the Setup > Calibrate menu. Follow the on-screen
instructions presented by the calibration wizard (See G-PILOT 3380 Operation Manual).
5-1 Calibrating the compass
5 Sea trials
Perform the sea trials:
After performing the dockside setup (see
section 4).
To check the operation of the
G-PILOT 3380 system.
For the sea trials, sail in an open area where there
are no other craft or obstructions. The sea should
be calm, the wind speed as low as possible and
there should be no currents.
This aligns the G-PILOT 3380 system compass to display the correct heading.
The compass can be aligned either to a reference compass or to a GPS connected to the G-PILOT 3380
system. Ensure there is no cross-wind or current.
To align the Compass unit go to Align heading in the Setup > Calibrate menu. Follow the on-screen
instructions presented by the calibration wizard (See G-PILOT 3380 Operation Manual).
5-2-2 Aligning the Rudder (Centre rudder)
This sets the rudder setting to sail a straight course. Ensure there is no cross wind or current.
To align the rudder go to Centre rudder in the Setup > Calibrate menu. Follow the on-screen
instructions presented by the calibration wizard (See G-PILOT 3380 Operation Manual).
5-2 Aligning the compass and the rudder
5-2-1 Aligning the compass (Align heading)
The compass or rudder can be aligned separately.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman G-PILOT 3380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman G-PILOT 3380 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman G-PILOT 3380

Navman G-PILOT 3380 User Manual - English - 47 pages

Navman G-PILOT 3380 User Manual - German - 47 pages

Navman G-PILOT 3380 Installation Guide - German - 34 pages

Navman G-PILOT 3380 User Manual - Dutch - 47 pages

Navman G-PILOT 3380 Installation Guide - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info