663850
32
Zoom out
Zoom in
Previous page
1/36
Next page
G-PILOT 3100 Operation Manual
NAVMAN
32
Alarm display Reason for message Recommended action by user Notes
DRV ERROR Rudder angle does not change Check drive power is turned on a s
when steering drive operates Check RFU is connected to rudder
Check fuses inside end of main
control unit
Check steering drive operation
GPS ERROR GPS has stopped sending data to Check GPS operation a c s
main unit Check GPS connection
GSU ERROR Gyro not sending data to main unit Check gyro is connected to a s
main unit; Service gyro
MCU ERROR Main unit not sending data to Check display unit is connected to a s
display unit main unit
Service main unit or display unit
NAV ERROR GPS is not navigating to a waypoint Start GPS navigating to a waypointm
when trying to engage G-PILOT or along a route
NEXT WPT? Boat has reached a waypoint Press any key to proceed to cancel alarm
(in GPS mode and WPT AKN is on) Then press ENT to start steering to the
next waypoint or press ESC to return to
STBY
NO DATA G-PILOT not receiving GPS data Check GPS operation m
when setting mode to GPS Check GPS connection
or G-PILOT not receiving wind instrument Check wind instrument operation m
data when setting mode to wind Check wind instrument connection
NVM ERROR Main unit memory has been corrupted Service main unit a s
PHA ERROR Rudder turns wrong way to rudder Check the rudder feedback unit a s
feedback unit Perform a rudder calibration
RFU ERROR Rudder feedback unit has stopped Check rudder feedback unit is a s
sending data to main unit connected to main unit
Service rudder feedback unit
ROUTE END Boat has reached the end of Press ESC to change to STBY or
a GPS route press ENT to change to compass
mode, sailing at current heading
TRK ERROR G-PILOT has changed to GPS mode Press ESC to return to STBY or press
but boat is too far off course ENT to have the G-PILOT steer the boat
to the correct course.
TAK ERROR In Wind mode, attempt to tack in the Change angle to wind m
wrong way or boat will be in irons
WND ALARM The wind angle has changed by more Change SWA a
than the alarm value Change to Compass mode
WND ERROR Wind instrument has stopped Check wind instrument operation a c s
sending data to main unit Check wind instrument connection
XTE ALARM XTE has exceeded the maximum Manually steer boat towards course a
value set by the user
Notes a Alarm sounds the internal and external (optional) beepers; press any key to mute
alarm, then press ESC to cacel the alarm message
c The G-PILOT 3100 changes to Compass mode
m The G-PILOT 3100 mode does ot change
s The G-PILOT 3100 changes to STBY
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman G-PILOT 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman G-PILOT 3100 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman G-PILOT 3100

Navman G-PILOT 3100 Installation Guide - English - 34 pages

Navman G-PILOT 3100 User Manual - German - 33 pages

Navman G-PILOT 3100 Installation Guide - German - 32 pages

Navman G-PILOT 3100 User Manual - Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info