663850
18
Zoom out
Zoom in
Previous page
1/34
Next page
G-PILOT 3100 Installation Manual
NAVMAN
18
Installation
1 Find a suitable location and arrangement for the unit as described above.
2 Choose, assemble and t a suitable rudder linkage.
3 Fit the unit as shown below:
If necessary,
mount base on
block to set height.
Set rudder
amidships.
Rotate base so arrow on arm
points near centre line on
base. Fit two screws provided
loosely in middle of slots.
Rotate base so arrow on
arm points to centre line
on base. Fit third screw
provided, tighten all screws.
Join coupling to
rudder linkage.
Snap end into
correct hole in
arm.
Ensure rudder
is amidships.
If necessary, cut connecting
rod at this end, then replace
coupling and lock nut.
4 Wire the cable back to the main unit, following the wiring guide (see section 3-2-2).
Main unit
Plug connector into socket
Holes in the bulkheads
must be at least 18.5 mm
(0.73") diameter.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman G-PILOT 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman G-PILOT 3100 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman G-PILOT 3100

Navman G-PILOT 3100 User Manual - English - 36 pages

Navman G-PILOT 3100 User Manual - German - 33 pages

Navman G-PILOT 3100 Installation Guide - German - 32 pages

Navman G-PILOT 3100 User Manual - Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info