470015
97
Zoom out
Zoom in
Previous page
1/104
Next page
97
FISHFINDER FISH450 Tricolor Installazione e Manuale operativo
NAVMAN
Collegamento standard
all'alimentazione
Nero 8 pin
Blu 8 pin
Profondità/Velocità/Temperatura
Aquaducer Standard
per poppa
Blu 8 pin
Velocità e
Temperatura
Profondità
Opzione trasduttori
sulla chiglia
Opzione carburante per
un solo motore
Nero 8 pin
Rosso
Nero
Trasduttore
per carburante
Opzione carburante per
due motori
Porta destra
del trasduttore
carburante
Porta sinistra
del trasduttore
carburante
Nero 8 pin
Bianco 8 pin
Giallo
Nero
Per attivare automaticamente il FISH450 Tricolor
all'avvio dell'imbarcazione, collegare sia il filo giallo che
quello rosso all'interruttore dell'accensione della barca.
Eseguire quest'operazione insieme all'opzione del
carburante, per assicurarsi che il FISH450 Tricolor sia
acceso e che misuri il flusso di carburante quando il
motore sta girando. Il tasto Backlight / Power non sarà
più utilizzato per accendere l'unità.
Avviso: il FISH450 Tricolor deve essere alimentato da una batteria
a 12 Volt e non deve essere immesso in un circuito senza batteria.
Interruttore
Bianco 8 pin
RCA
4 pin
Il FISH450 Tricolor utilizza un
sistema di connettori codificati
in base al colore:
Nero = Alimentazione
Blu = Aquaducer
Bianco = Carburante
I connettori sono a baionetta,
inserire il plug nella presa e
quindi ruotare la fascetta per
bloccarlo. Assicurarsi che la
fascetta sia ben stretta per
assicurare un collegamento a
prova d'acqua.
Importante
Il collegamento deve
passare da un fusibile (1
Amp) o un interruttore.
Se possibile, far passare i
cavi del trasduttore
lontano da altri fili presenti
sull'imbarcazione.
Potrebbero verificarsi
disturbi elettrici provocati
dai fili del motore, della
pompa di sentina o di
altre apparecchiature.
Collegare il filo rosso, del
cavo a due uscite
dell'alimentazione, al polo
positivo e quello nero alla
terra.
Un collegamento corto con
la batteria aiuta a prevenire
gli sbalzi di voltaggio.
Se non si usa l'opzione di
auto accensione,
collegare il filo giallo a
quello nero della terra.
Cavo 8m
Cavo 0.4m
Cavo 2m
Cavo 8m
Cavo 8m
Cavo Alimentazione/
carburante 2m
Adattatore carburante
per barche a due motori
5-8 Collegamento dei fili dell'auto accensione
5-7 Collegamento dei fili
Codici dei colori del cavo alimentazione
Nero = Terra (polo negativo della batteria)
Giallo = auto accensione +12 Volt (ingresso)
Rosso = +12 Volt (ingresso)
Verde = Beeper esterno
Bianco = NMEA (uscita)
Beeper esterno
È possibile collegare un Beeper
esterno con un circuito interno a 12
volt. Il consumo massimo è di 250mA.
Filo verde del cavo
dell'alimentazione
Beeper esterno
Collegare il Beeper sul positivo
Cavo 8m
Rosso
Rosso
Nero
Rosso
Nero
Fusibile
Fusibile
Fusibile
Fusibile
Cavo Alimentazione/
carburante 2m
Bianco 8 pin
Bianco 8 pin
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH450 Tricolor FISHFINDER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH450 Tricolor FISHFINDER in the language / languages: German, Dutch, Italian, Swedish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info