470004
28
Zoom out
Zoom in
Previous page
1/36
Next page
Removing the display unit
The display unit can be removed after each
use for protection against the environment or
security reasons.
When removing the display unit, ensure that
The FISH 4500/4600 has three sockets located
on the rear of the display unit. These are for
the:
Power/data cable (black locking collar)
Optional fuel transducer cable (white lock-
ing collar)
Transducer cable (blue locking collar).
The collars must be locked for a watertight
connection.
The power cable has a black 8 pin connector
plug. Push this plug into the upper socket, which
has a black nut, then turn the collar to lock.
The optional fuel transducer cable has a white
8 pin connector plug. Push this plug into the mid-
dle socket, which has a white nut, then turn the
collar to lock. (If the fuel transducer cable is not
being installed, leave the dust plug in place.)
The sonar transducer cable has a blue 6 pin
connector plug. Push this plug into the lower
socket, which has a blue nut, then turn the col-
lar to lock. Do not cut the cable. If necessary,
extend the cable by adding a Navman 13 ft. (4
m) extension cable (a maximum of one cable
can be used).
If possible, route the transducer cable away from
other wiring on the boat. Electrical noise from
engine wiring, bilge pumps and other electri-
cal equipment can affect the display unit. The
shortest and most direct connection to the boat’s
battery helps to minimise voltage drop.
Ensure that cable connections do not lie in the
bilge. Secure the cable(s) at regular intervals.
6-4 Power and transducer connections
Through hull transducers
Through hull transducers are supplied with ‘Y’
adapter cable for connection of both transducers
into the blue connector.
the plugs left in the boat are not exposed to the
elements. Push the attached dust covers over
the exposed ends of the plugs. Keep the display
unit in a dry clean place such as the optional
Navman carry bag.
From fuel tank
To engine
Note: Shield is connected to
pin 1, black wire
Transom mount dual
frequency aquaducer
Speed/Temperature
through hull transducer
Dual frequency
through hull trans-
ducer
6 pin
8 pin
Black connector
White connector
Blue connector
Fuel
transducer
FISH 4500/4600 Installation and Operation Manual28
NAVMAN
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4500 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4500

Navman FISH 4500 User Manual - German - 39 pages

Navman FISH 4500 User Manual - Dutch - 40 pages

Navman FISH 4500 User Manual - French - 38 pages

Navman FISH 4500 User Manual - Italian - 38 pages

Navman FISH 4500 User Manual - Portuguese - 38 pages

Navman FISH 4500 User Manual - Swedish - 37 pages

Navman FISH 4500 User Manual - Spanish - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info