470006
30
Zoom out
Zoom in
Previous page
1/37
Next page
Removing the display unit
The display unit can be removed after each
use for protection against the environment or
security reasons.
When removing the display unit, ensure that
the plugs left in the boat are not exposed to
the elements. Push the attached dust covers
over the exposed ends of the plugs. Keep the
display unit in a dry clean place such as an
optional Navman carry bag.
Flush Mounting
1. Cut a hole in the bulkhead for the display
unit using the flush mount template.
2. Drill four holes for the mounting studs
using the flush mount template.
3. Screw the four studs into the brass inserts
in the back of the display unit.
4. Sit the display unit in place and fit the
washers and nuts to the studs.
Bracket Mounting
1. Fix the mounting bracket onto the boat
using the three stainless steel screws. Do not
overtighten the screws, as the bracket may
not rotate.
2. Push the display unit onto the mounting
bracket and tighten it firmly using the knob
on the mounting bracket.
3. Attach the cables.
6-4 Systems of several instruments (4433 0nly)
Several Navman instruments can be connected
together to share data.
The FISH 4432/4433 is particularly suited
to work with the TRACKER 5430 (4.3”
greyscale)/5380 (3.8” color) - Navman’s GPS
chartplotters with worldwide coverage.
There are two ways of connecting instruments
together; NavBus or NMEA.
NavBus
NavBus is a Navman proprietary system that
allows systems of multiple instruments to be
built using a single set of transducers. When
instruments are connected by NavBus:
If the units, alarms or calibration are
changed in one instrument, then the values
will automatically change in all instruments
of the same type.
Each instrument can be assigned to
a group of instruments. Then, if the
backlight setting is changed in one group,
it will automatically change for the other
instruments in that group. However, the
backlight setting will not change for
instruments in different groups.
If an alarm sounds, mute it by clearing the
alarm on any instrument which can display
that alarm.
NMEA
NMEA is an industry standard for marine
instrument connections. Data sent by one
instrument over an NMEA line can be read and
displayed by another instrument that accepts
NMEA 0183 Version 2. It is not as flexible as
NavBus as it requires dedicated connections
between instruments.
Please contact your Navman dealer for
information on Navman’s full range of NMEA
enabled instruments and connection options.
FISH 4432/4433 Installation and Operation Manual 32
NAVMAN
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4432 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4432

Navman FISH 4432 Usermanual and installation guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info