470006
6
Zoom out
Zoom in
Previous page
1/37
Next page
Power On / Auto Power
Press to turn the fishfinder on.
If the fishfinder is wired for auto power, it turns
on automatically whenever the boat’s ignition
is turned on. This ensures that the engine
hours counter and optional fuel functions are
activated. A title display appears briefly. This is
followed automatically by the Installation menu
the first time the fishfinder is switched on. Use
this menu to specify the language (see section 3-1
Setup > System) and units (see section 3-6 Setup
> Units).
At all other times, the title display is followed
by the display that was used most recently.
If the transducer is not connected, the
message: Enter simulate mode? will
appear. Press
or
to
switch between
Yes, No or Never. (If the transducer was
not intentionally disconnected, turn off
the fishfinder and refer to the section on
Troubleshooting in Appendix B.)
Press ENT to confirm the selection and the
startup sequence will continue.
Key Operation
The fishfinder is operated through menus.
To select a menu item:
1. Press DISP or MENU
2. Press
or to move the highlight to
the item.
3. Press ENT
to select the item.
To change a number, word or setting:
1. Use the cursor keys,
, , ,
to highlight
the number, word or setting and to make the
change(s).
2. Press ENT
to confirm; ESC to cancel.
Power Off
To turn the fishfinder off, hold . A countdown
box appears. Continue to hold for 3 seconds
until the fishfinder turns off.
Note: If the unit is wired for Auto Power
(section 6-5 Wiring options) the fishfinder can
be turned off only when the boats ignition is
turned off.
Backlight Adjustment
To change the backlight level:
1. Press
briefly to show the display
controls.
2. The display and keys are backlit, with a
choice of 16 brightness levels.
Press
to dim or
to brighten.
3. To change contrast:
i Press
ii Press <, > to adjust
4. Press ENT to save settings.
5. Press ESC to exit.
Press
twice to return to the maximum
backlight setting and default contrast.
Menu Note:
Some menu items in the
FISH 4432/4433 menu’s
utilize checkboxes.
If the box is selected or
checked’ (contains a check
or tick), then that function is
enabled or ON.
If the box is de-selected
or ‘un-checked’ (does not
contain a check or tick), then
that function is disabled
or OFF.
To select or de-select
a checkbox, highlight the
menu item and press ENT.
FISH 4432/4433 Installation and Operation Manual 8
NAVMAN
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4432 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4432

Navman FISH 4432 Usermanual and installation guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info