470011
21
Zoom out
Zoom in
Previous page
1/30
Next page
22
Fish 4430/4431 Installation and Operation Manual
Select MAIN MENU - SETUP - LOG to display the
available options.
Press
or
to
highlight an option:
LOG
Selects which log
is displayed on the
DATA screen, TOTAL
or TRIP.
Press
to choose
between TRIP
or TOTAL. Both
logs are retained
in the NAVMAN
fishfinder but only
the selected log is
displayed.
4-6 LOG menu (FISH 4431 ONLY)
ZERO TRIP LOG
Resetting the trip log will return the trip log value
to zero. The trip log is retained in the fishfinder
memory so it retains the distance value if the
fishfinder is switched off during a trip. Therefore,
the trip log needs to be reset manually each time
the user wishes to log a trip.
Press
or
to highlight ZERO TRIP LOG, then
press
to select it. The message box “ZERO
TRIP LOG YES” appears.
Press
to select YES or NO. Then press or
to reset the trip log and exit.
ZERO ALL LOGS
Resetting both logs will return both the trip log
and the total log values to zero.
Press
or
to highlight ZERO ALL LOGS, then
press
to select it. The message box “ZERO
ALL LOGS YES” appears.
Press
to select YES or NO. Then press
or
to exit.
Use this menu at installation time, to select the
language and to enter the keel offset value, the
number of engines and the fuel tank size. The
INSTALL menu can also be used to calibrate the
water temperature and boat speed.
Select MAIN MENU - SETUP - INSTALL to display
the menu.
4-7 INSTALL menu
Press
or
to
highlight an option.
LANGUAGE
The following
languages are
available: English,
French, German,
Spanish, Italian,
Dutch, Swedish,
Portuguese, Finnish
and Greek.
Press
or
to
highlight the
selected language,
then press to
save and exit.
KEEL OFFSET
Keel offset is the distance between the location
of the depth transducer and the point the
displayed depth is measured from.
Enter a keel offset value when the transducer is
located below the water surface but a display
of total water depth is required, or when
the depth of water below the boat’s keel is
required.
Press
or
to select KEEL OFFSET, then press
to display the keel offset box.
Negative values display the depth as measured
from a point below the transducer (e.g. keel).
Positive values display the depth as measured
from a point above the transducer (e.g. water
surface).
Press
or
to increase or decrease the value.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4431 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4431

Navman FISH 4431 Usermanual and installation guide - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info