470011
16
Zoom out
Zoom in
Previous page
1/30
Next page
17
Fish 4430/4431 Installation and Operation Manual
Select MAIN MENU - DATA to display the DATA
screen:
A graph displays the surface water temperature
for the last 40 minutes and is updated every
30 seconds. The current water temperature
is displayed above the graph and is updated
every second.
3-7 DATA screen
The temperature can be displayed in °F
(Fahrenheit) or °C (Celsius). Use the SETUP
- UNITS - TEMPERATURE menu to select the
desired temperature units (see section 4-2).
Alarms that indicate a specific temperature, or
rate of change of temperature, may be enabled
(see section 4-1).
Log (F4431 ONLY) One of two distance
logs can be displayed: Trip Log or Total Log.
Both logs are retained in the FISH 4430/4431
memory when the unit is switched off.
Use the SETUP - LOG menu to select the Trip
Log or Total Log (see section 4-6). The Trip
Log must be reset manually (e.g. to record
total mileage during a season, or the distance
travelled on this trip).
Note: That the units displayed on each Log will
correspond with the Speed.
Speed (F4431 ONLY) can be displayed in knots
(KN), miles per hour (MPH), or kilometres per
hour (KPH). Use the SETUP - UNITS - SPEED
menu to select the desired speed units (see
section 4-2).
Battery
Depth
Speed
Temperature
Temperature
Graph
Log
Engine hours
Enabled
alarms
Select MAIN MENU - RANGE to change the
manual range and adjust the selected depth
range.
The range setup box is displayed. This shows
the depth of water displayed vertically and the
range mode setting.
3-8 RANGE menu
NAVMAN fishfinders has two range modes,
Auto Range and Manual Range. The use of Auto
Range is recommended. See section 3-2 for
more details.
To change between Auto Range and Manual
Range, press
.
The Manual Range mode offers the user a
choice of pre-selected water depths. Use
and
to display the options and select a water
depth.
Press
to exit.
TIP: Use the < key to immediately return to the fish finder screens.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4431 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4431

Navman FISH 4431 Usermanual and installation guide - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info