470008
10
Zoom out
Zoom in
Previous page
1/30
Next page
FISH 4350 / 4380 Installation and Operation Manual10
NAVMAN
When asked Are you sure? select Yes.
Tank size
Enter the capacity of the fuel tank.
Num. engines
Set the number of engines to 0, 1 or 2. If 0 is
selected the fuel features are turned off.
Calibrate
See section 3-9 Setup > Calibrate.
Flow Þ lter
Most engines do not draw fuel from the tank at
a steady rate. To give a stable fuel ß ow reading,
the Þ shÞ nder calculates the ß ow value(s) by
taking several measurements and averaging
them. Use the Flow Þ lter to set the period over
which the fuel ß ow is averaged.
For twin engine installations, the fuel ß ow for
each engine must be adjusted separately.
The Flow Þ lter can be set from 0 to 10 seconds.
Use the lowest value which gives a stable ß ow.
Usually a value of 5 seconds (default setting)
will give a satisfactory result for two-stroke
carburettor engines.
This setting affects the Fuel ß ow and Fuel
economy reading on the Fuel display (see
section 5-5. Fuel display) but it does not affect
the Fuel used reading.
Tank full
Select Tank full each time the fuel tank(s)
are completely reÞ lled. When asked Are you
sure? select Yes. Otherwise, the reading
on the Fuel display (see section 5-5 Fuel
Display) and the Low Fuel Alarm (see section
3 -6 Setup > Alarms) are meaningless.
Set remaining
Before doing a partial reÞ ll of the tank or remov-
ing fuel manually from the tank (for example,
by siphoning it off):
1. Note the Remaining reading on the
Fuel display.
2. Note how much fuel is added or removed.
3. Calculate how much fuel is now in the
tank.
4. Select Set remaining and update
the reading.
It is essential to do this whenever some fuel
is added or removed. Otherwise, the reading
on the Fuel display (see section 5-5 Fuel
Display) and the Low Fuel Alarm (see section
3-6 Setup > Alarms) are meaningless.
Clear Used
Select Clear used to set Used (the amount
of fuel used) to zero. Do this to start measuring
the amount of fuel used over a certain time or
distance.
3-4 Setup > Data
Press MENU twice to display the Setup menu,
then select Data:
3. Press
at any data Þ eld to show the list
of data items that can be displayed there.
4. Highlight the required data item and press
. The data item is immediately displayed
in that data Þ eld.
5. Press
or MENU when Þ nished.
Time base
To change the Time base of the temperature
graph, select Time base and press
. Choose
between 5 mins, 10 mins, 20 mins, 1 hour and
2 hours and press
to conÞ rm.
Data setup
To change data items (FISH 4380 only):
1. Select Data setup, and press
2. Use
or
to move from data Þ eld to
data Þ eld.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4350 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4350

Navman FISH 4350 User Manual - German - 31 pages

Navman FISH 4350 User Manual - Dutch - 31 pages

Navman FISH 4350 User Manual - French - 34 pages

Navman FISH 4350 User Manual - Italian - 32 pages

Navman FISH 4350 User Manual - Portuguese - 35 pages

Navman FISH 4350 User Manual - Swedish - 29 pages

Navman FISH 4350 User Manual - Spanish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info