Manual Navman FISH 4200 (page 29 of 32) (English)

470014

Zoom out

Zoom in

1/32

29FISH 4200 Installation and Operation Manual

NAVMAN

11. A twin engine installation shows only one

flow rate:

a) Check that the number of engines is set to 2.

See section 4-8.

12. Erratic fuel FLOW readings:

a) The fuel flow transducer may have been

mounted too close to the fuel pump, or may be

subject to excessive vibration. Refer to the

Installation Instructions supplied with the fuel

transducer.

b) Check for air leaks in the fuel line or in the fuel

pickup in the tank.

c) The FLOW FILTER value is not suitable for the

engine. Check that the value is not set to zero,

and then try increasing the value until a steady

FLOW rate is shown. See section 4-9.

13. There is no reading for fuel ECONOMY:

a) The boat must be travelling through the water

to generate an ECONOMY reading.

b) Check that the paddlewheel on the transducer

is spinning freely, and that the two magnets in

the paddlewheel are still in place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4200 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Navman FISH 4200 Manual

Product: