493523

Navman F37M Manual

76
Zoom out
Zoom in
Previous page
1/100
Next page
User Manual
2
Important safety information
PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or
make it illegal to operate in some jurisdictions.
Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or
modifications.
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or
modifications.
It is your sole responsibility to place, secure and use your Navman in a manner that will not cause accidents,
personal injury or property damage. Always observe safe driving practices.
Do not mount your Navman in a way that may interfere with the safe operation of the vehicle, the deployment
of air bags or other safety equipment.
Do not operate your Navman while driving.
Before you use your Navman for the first time, familiarize yourself with your device and its operation.
On main roads, the distance to an exit calculated by your Navman may be further than the distance shown on
road signs. Road signs show the distance to the start of an exit while your Navman shows the distance to the
next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance
information on road signs.
The use of information regarding safety or speed camera locations may be subject to local laws in the country
of use. You are responsible for checking that you can legally use the information in your country or in the
country where the information will be used.
Do not handle your Navman while it is hot. Let the product cool, out of direct sunlight.
Do not expose your Navman to direct sunlight in an unattended vehicle for prolonged periods. Overheating
may damage the unit.
Note: To discourage theft, do not leave the Navman, its mounting bracket or any cables in plain view in an unattended vehicle.
3
Home Charger-specific safety information
To charge your Navman from the mains power, use the home charger supplied by Navman as an accessory
(may be sold separately). Using other home chargers with your Navman could result in serious injury or
property damage.
Never use the charger if the plug or cord is damaged.
Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment.
Exposure to water may cause electrical sparks or fires.
Never touch the charger when your hands or feet are wet.
Allow adequate ventilation around the charger when using it to operate your Navman or charge the Navman
internal battery. Do not cover the charger with paper or other objects that will reduce ventilation. Do not use
the charger while it is inside a carrying case or other container.
Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The
voltage requirements can be found on the home charger casing and/or packaging.
Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged
or exposed to excess moisture.
Internal battery-specific safety information
Your Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or
explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble,
crush or puncture the battery.
Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of
the battery in fire or water.
Only use the correct home charger (sold separately) or in-car charger supplied by Navman to charge the
internal battery. Only use the installed internal battery with the Navman unit.
The battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 40ºC
(104ºF).
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage.
Navman disclaims all liability for installation or use of the Navman that causes or contributes to death,
injury or property damage or that violates any law.
Warning Notice to Drivers in the United States
State law may prohibit drivers in states such as Arizona, California and Minnesota from mounting objects on
their windshields while driving. Please make sure you research and follow your most current State laws. An
alternative mounting option is provided in the box with your product, also, stores offer additional mounting
alternatives. Navman does not take any responsibility for any fines, penalties, or damages that may be incurred
as a result of disregarding this notice.
4
Caring for your Navman
Taking good care of your Navman will ensure trouble-free operation and reduce the risk of damage to your
Navman.
Keep your Navman away from excessive moisture and extreme temperatures.
Avoid exposing your Navman to direct sunlight or strong ultraviolet light for extended periods of time.
Do not place anything on top of your Navman or drop objects on your Navman.
Do not drop your Navman or subject it to severe shock.
Do not subject your Navman to sudden and severe temperature changes. This could cause moisture
condensation inside the unit, which could damage your Navman. In the event of moisture condensation,
allow your Navman to dry out completely before use.
The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic
screen protectors designed specifically for use on portable devices with LCD panels may be used to help
protect the screen from minor scratches.
Never clean your Navman with it powered on. Use a soft, lint-free cloth to wipe the screen and the
exterior of your Navman.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly,
modification or any attempt at repair could cause damage to your Navman and even bodily injury or
property damage and will void any warranty.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your
Navman, its parts or accessories.
5
Contents
Important safety information .......................................................................................................................... 2
Home Charger-specific safety information ..............................................................................................3
Internal battery-specific safety information ............................................................................................3
Warning Notice to Drivers in the United States......................................................................................3
Caring for your Navman...............................................................................................................................4
Welcome..............................................................................................................................................................8
Important information for using the manual ...........................................................................................8
How do I install my Navman?.......................................................................................................................... 9
F35/F37M Installation...................................................................................................................................9
F45/F47M Installation ................................................................................................................................10
Receiving TMC information .......................................................................................................................10
Getting to know your Navman.......................................................................................................................11
F35/F37M.......................................................................................................................................................11
F45/F47M...................................................................................................................................................... 12
Turning on and off ....................................................................................................................................... 13
Shutdown and hardware reset .................................................................................................................. 13
How do I monitor the battery status?..................................................................................................... 13
How do I charge the battery?.................................................................................................................... 13
Charging the battery via the USB cable (sold separately)...................................................................14
Navigating on the screen ........................................................................................................................... 15
How do I adjust the volume? .................................................................................................................... 15
How do I get started?...................................................................................................................................... 16
How do I turn my Navman on for the first time?..................................................................................16
What are the main screens I will use? .......................................................................................................... 18
Main Menu screen ........................................................................................................................................18
Map screens ..................................................................................................................................................18
How do I navigate with GPS?.........................................................................................................................20
How does my Navman receive GPS signals?..........................................................................................20
How do I view my GPS status? .................................................................................................................20
How do I go from A to B? ............................................................................................................................... 21
What if I miss a turn?.................................................................................................................................. 21
How do I search for an address?...............................................................................................................22
Case Study: How do I search for an address? ....................................................................................22
Using the Keyboard screen....................................................................................................................24
Using the Destination Search screen....................................................................................................24
How do I create a trip with multiple stops? ...........................................................................................26
Case Study: How do I navigate to multiple addresses? ...................................................................26
How do I skip a waypoint during a multi-stop trip? .........................................................................29
How do I search for a Point of Interest (POI)?.......................................................................................30
Case Study: How do I search for a Point of Interest?.......................................................................30
How do I save Favourites and My Home?....................................................................................................33
Can I save a NavPix
TM
to a Favourite?......................................................................................................33
How do I save a Favourite or My Home? ................................................................................................33
How do I navigate to a Favourite?............................................................................................................34
How do I navigate to My Home?..............................................................................................................34
6
Option 1 - Via the Main Menu ..............................................................................................................34
Option 2 - Via the Favourite Destinations screen ..............................................................................34
How do I edit the name of a Favourite?..................................................................................................35
How do I delete a Favourite?.....................................................................................................................36
How do I navigate to a recent location?......................................................................................................37
How do I view my route?................................................................................................................................38
3D Map screen..............................................................................................................................................38
2D Map screen............................................................................................................................................. 40
Traffic Overview screen (select models only) ........................................................................................42
Route Overview screen.............................................................................................................................. 44
Turn-by-Turn screen....................................................................................................................................46
How do I use the Map Menu?................................................................................................................... 48
Displaying the Map Menu ..................................................................................................................... 48
Map Menu options.................................................................................................................................. 48
How do I avoid an area?.............................................................................................................................49
How do I add an Avoid Area?................................................................................................................49
How do I delete an Avoid Area?...........................................................................................................49
How do I delete all Avoid Areas? .........................................................................................................49
How do I preview a route?..............................................................................................................................50
How do I view my route statistics?............................................................................................................... 51
How do I view statistics on my current route? ...................................................................................... 51
How do I view statistics of my trips to date?.........................................................................................52
How do I view my trip logs? ......................................................................................................................53
How do I use NavPix
TM
? ............................................................................................................................54
How do I manage my NavPix
TM
?.........................................................................................................54
Album management...............................................................................................................................54
NavPix
TM
management......................................................................................................................56
How do I view a NavPix
TM
in full-screen? .....................................................................................57
How do I navigate to a NavPix
TM
? ......................................................................................................58
How do I save a NavPix
TM
to a favourite? .........................................................................................59
How do I save a NavPix
TM
to a POI?...................................................................................................60
How do I receive current traffic information? (Select models only) ...................................................... 61
How does my Navman receive traffic information?.............................................................................61
Traffic status............................................................................................................................................ 61
How will I know when a Traffic Event occurs? .......................................................................................62
How do I view a list of all events on my route?.....................................................................................63
How do I view traffic details?....................................................................................................................64
How do I know if a detour is recommended?.........................................................................................65
How do I avoid an event on my route?...............................................................................................65
How do I cancel a detour around an event on my route? ...............................................................65
How do I automatically avoid all traffic and clearance events on my route? .............................65
Traffic Messages...........................................................................................................................................66
Detour Not Available messages...........................................................................................................66
Detour recommended messages..........................................................................................................66
What can I customise? ....................................................................................................................................67
Route Options..............................................................................................................................................68
Route Calculation 1/5.............................................................................................................................68
Road Types 2/5........................................................................................................................................69
Road Types 3/5........................................................................................................................................70
Driver Alerts 4/5 ..................................................................................................................................... 71
7
Data Recording 5/5................................................................................................................................. 72
Map Display ..................................................................................................................................................72
Map Display 1/3.......................................................................................................................................72
Map Display 2/3 ......................................................................................................................................72
Select Map 3/3 ........................................................................................................................................72
Map POIs.......................................................................................................................................................72
Volume ..........................................................................................................................................................72
Screen ............................................................................................................................................................72
POI Alerts......................................................................................................................................................72
GPS.................................................................................................................................................................72
GPS Status................................................................................................................................................72
Resetting your GPS fix ...........................................................................................................................72
Setting your GPS mode..........................................................................................................................72
Language .......................................................................................................................................................72
Traffic.............................................................................................................................................................72
Traffic System Status .............................................................................................................................72
Traffic Event Notification ......................................................................................................................72
Select event sorting type.......................................................................................................................72
Power.............................................................................................................................................................72
Keyboard .......................................................................................................................................................72
How does predictive text (abc, def…) work? ....................................................................................72
Units...............................................................................................................................................................72
Units 1/2 ...................................................................................................................................................72
Units 2/2...................................................................................................................................................72
Start-up ......................................................................................................................................................... 72
Saved Info .....................................................................................................................................................72
Tutorial ..........................................................................................................................................................72
About ............................................................................................................................................................. 72
Shop Demo ...................................................................................................................................................72
Reference ...........................................................................................................................................................72
Troubleshooting...........................................................................................................................................72
Point of Interest categories........................................................................................................................72
Branded Points of Interest.....................................................................................................................72
Point of Interest categories by Navman.............................................................................................72
Point of Interest categories by subscription ......................................................................................72
Traffic and other TMC Events....................................................................................................................72
Safety Camera POIs .................................................................................................................................... 72
Disclaimer .....................................................................................................................................................72
Compliance...................................................................................................................................................72
Copyright ......................................................................................................................................................72
For more information ...................................................................................................................................... 72
Safety camera information ...................................................................................................................72
Online support.........................................................................................................................................72
8
Welcome
Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of
your Navman from first set-up through to continuous use. Please read this manual carefully before using your
Navman for the first time. Keep this manual in a safe place and use as your first point of reference.
Important information for using the manual
It is important to understand the terms and typographical conventions used in this manual.
Formatting
The following formatting in the text identifies special information:
Convention Type of Information
Bold Navman components or items displayed on screen, including buttons, headings, field names and options.
Italics Indicates the name of a screen.
Terms
The following terms are used throughout this manual to describe user actions.
Term Description
Tap Press and release an item displayed on the touch screen.
Tap and hold Tap and hold an item displayed on the touch screen for 2-3 seconds.
Select Tap an item in a list or tap a command from a menu.
9
How do I install my Navman?
CAUTION:
Select an appropriate location for mounting the Navman in a vehicle. Never place the Navman where the driver’s field
of vision is blocked.
If the car’s windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this
instance, please mount your Navman where there is a “clear area.”
To protect your Navman against sudden surges in current, connect the car charger only after the car engine has been
started.
F35/F37M Installation
4
1
2
3
10
F45/F47M Installation
Receiving TMC information
Note: Not available on all models.
You can receive current traffic information on your Mio via an optional traffic accessory. To receive traffic
information, you must connect your Navman to the in-car charger.
TMC information is monitored by the navigation software. Once the information is received, you can view it on
your device and traffic icons will appear in the map view. Certain roads with reported traffic will be highlighted
and you can choose to avoid those roads and an alternate route will be automatically calculated. For more
information, see “
How does my Navman receive traffic information?” on page 61.
4
1
2
3
11
Getting to know your Navman
F35/F37M
n
Power Switch
p
Speaker
o
Socket for in-car charger, USB cable
(sold separately), home charger (sold
separately) and TMC accessory kit (may
be sold separately)
q
Cradle Socket
12
F45/F47M
n
Power Switch
p
Cradle Socket
o
Socket for in-car charger, USB cable
(sold separately), home charger (sold
separately) and TMC accessory kit (may
be sold separately)
q
Speaker
13
Turning on and off
For normal operation, turn off your Navman by sliding the power switch to the OFF position. Your Navman
enters a suspended state. To use it again, slide the power switch to the ON position. Your Navman will be back
to where you left off.
F35/F37M F45/F47M
Shutdown and hardware reset
Occasionally, you may need to perform a hardware reset if your Navman stops responding; or appears to be
“frozen” or “locked-up.”
You can perform a hardware reset by shutting down your Navman and then turning it back on. To shut down
your Navman, slide the power switch to the RESET position. To turn on your Navman after shutting it down,
slide the power switch to the ON position.
NOTE: Switching to the Reset position turns the battery off. It is recommended you move the switch to this position if you are
planning to store your Navman for any length of time.
How do I monitor the battery status?
Your Navman has an internal battery that when fully charged, should provide power for up to 3 hours.
You can monitor battery power status on the Power screen.
Note: The battery may not be fully charged when you use your Navman for the first time.
To access the Power screen, tap .
How do I charge the battery?
The Battery Status bar displays External Power while the battery is charging; when the battery is fully charged,
the Battery Status bar will display at 100%.
To charge your Navman in a vehicle, plug the in-vehicle charger to the bottom of your Navman and
the other end into the vehicle power socket, as shown in the” How do I install my Navman?” section.
To charge your Navman using your computer, see later section for details.
To charge your Navman using a mains power socket, plug the mains power charger cable to the
bottom of your Navman and the mains power charger pack into the mains power socket.
Note: The mains power charger is not included with all models and may be purchased separately.
14
Charging the battery via the USB cable (sold separately)
If you intend to charge your Navman in this way, turn off your Navman so that it takes less time to charge the
battery.
1. Turn on the computer.
2. Connect the mini-USB end of the USB cable to the
bottom of your Navman and the other end to a
USB port on your computer.
F35/F37M F45/F47M
Note: If your Navman is on when connected to a computer, a screen appears to prevent you from using your Navman.
Note: When the Navman is connected to a computer, it is recognized as an external mass storage device. Do not delete any
files pre-installed in the Navman. Deleting files of which the function is unknown can cause programs or features to
malfunction.
CAUTION: For optimal performance of the lithium battery:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged.
When storing the product for a long period of time, be sure to fully charge the battery at least once every two weeks.
Over discharge of the battery can affect the charging performance. Switching the power to Reset will prolong the
battery life if you don't plan to use your Navman for a long period of time.
15
Navigating on the screen
To operate your Navman, touch the screen with your fingertip. You can perform the following actions:
F35/F37M F45/F47M
Tap
Touch the screen once with your fingertip to open items or select onscreen buttons or options.
Drag
Hold your fingertip on the screen and drag up/down/left/right or across the screen. (This is not supported
by all applications.)
Tap and hold
Tap and hold your fingertip until an action is complete, or a result or menu is shown. (This is not supported
by all applications.)
How do I adjust the volume?
The volume on your Navman can be adjusted by the volume control on the Volume preference screen.
To mute the volume from the map screens, tap
and then tap . Tap and hold a bit longer allows
you to shortcut directly to the volume screen.
For more information on how to adjust the volume on your Navman, see “
Volume” on page 77.
16
How do I get started?
Note: The first time you use your Navman, it may take up several minutes to establish a GPS connection. For more information
about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD.
How do I turn my Navman on for the first time?
To get started for the first time, complete the following steps:
1. Read the Important Safety Information on page
2.
2. Position your Navman
Follow the instructions on page
9.
Note: Ensure that your Navman does not obstruct the driver's view, or interfere with the operation of the vehicle airbags
and safety devices.
3. Turn your Navman on
Your Navman will turn on and display the Language screen.
4. Select your preferred language
From the Select Language screen, tap your preferred language.
To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up
check box.
You can change your preferred language while using your Navman, see “Language” on page 82.
5. Read the warning message
a) The Safety Agreement screen will display after you have selected your preferred language.
Read the Safety Agreement message.
b) To confirm that you have read and understood the message, tap Accept.
The Tutorial will display.
6. View the Tutorial
When you have accepted the Safety Agreement, the first Tutorial screen will display.
To prevent the Tutorial from displaying again on start-up, clear the Show tutorial on start-up check
box.
To move forward through the Tutorial screens, tap .
To view the previous screen, tap
.
To view the Tutorial again while using your Navman, see “Tutorial” on page 92.
Note: If you have maps installed from multiple continents, you may be prompted to select the maps you require. To use
maps from a different continent at a later time, you can select a different map via the Select Map screen in the Select
Map 3/3 preferences; refer to page
75.
17
When you have finished the Tutorial, the 3D Map screen will display. If you have a GPS fix, your current location
will be displayed on the map.
18
What are the main screens I will use?
Main Menu
screen
The Main Menu screen is your starting point for searching for a destination. The Main Menu screens also allow
you to enter an address for your destination and customise preferences.
The Main Menu can be accessed from the map screens by tapping
or by tapping the status bar at the
bottom of any screen.
Note: The Main Menu screens may differ from those displayed above, depending on your Navman model.
Map screens
There are five map screens used to view the route to your destination:
3D Map
2D Map
Traffic Overview (Not available on all models)
Route Overview
Turn-by-Turn™
The Map screens can be accessed from the Main Menu screen by tapping
.
You can cycle through the different map screens by tapping
on any map screen (the name of the map
screen will display briefly as your cycle through).
19
For more information on the map screens, see “How do I view my route?” on page 38.
For information on using the Map menu from the 3D Map and 2D Map screens, see “How do I use the Map
Menu?” on page
48.
20
How do I navigate with GPS?
The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft).
GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi).
Each satellite transmits a range of signals which are utilised by GPS receivers, such as your Navman, to
determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time,
only four signals are required to provide a position or “GPS fix” (latitude and longitude), for vehicle navigation
systems.
How does my Navman receive GPS signals?
Your Navman receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal
strength, ensure your Navman is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky.
GPS reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect
on your reception.
How do I view my GPS status?
You can view your GPS status at any time from the map screens or the Viewfinder screen. displays green
when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS
fix,
displays between one and four green vertical bars.
To view your GPS status in more detail, see “GPS Status” on page 80.
To set your GPS mode, see “Setting your GPS mode” on page 81.
21
How do I go from A to B?
Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including
Points of Interest (POIs) such as accommodation, parking areas, petrol stations, railway stations and airports.
When you ... Then ...
know the address of your destination use the address-entry wizard to enter the address “How do I search for an
address?” on page
22.
want to make multiple stops use the Multi-stop Trip Planner screen to enter multiple waypoints “How do I
create a trip with multiple stops?” on page
26.
need to find a named site, feature,
landmark or public venue
search for a Point of Interest "How do I search for a Point of Interest (POI)?” on
page
30.
want to navigate to a Navpix
TM
location
use the Go To NavPix screen to navigate to a preinstalled Navpix
TM
“How do I
navigate to a
Navpix
TM
?” on page 58.
WARNING: For your safety, enter destination information before you start a journey. Do not enter a destination while
driving.
What if I miss a turn?
Back-On-Track™ Automatic Rerouting
You will be redirected if you make a wrong turn. A message informing you that your route is being re-calculated
will display at the top of the screen.
To cancel a route re-calculation tap
. A warning will display, asking you to confirm the cancellation. If
confirmed, both the re-calculation and your current route will be cancelled.
22
How do I search for an address?
Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an
address-entry wizard.
This section provides a case study to help guide you through setting your destination.
Note: In some countries, you can search for your destination by postcode or zip code. If you are in the United Kingdom, and you
know the postcode of your destination, you can search for it from the Destination Search screen by tapping Postcode, then
entering a postcode of up to eight characters.
Quick Steps
1. Open the Destination Search screen
2. Select the country
3. Search for the city/area
4. Search for the street
5. Search for the house number
6. Tap
.
Case Study: How do I search for an address?
This case study will show you how to enter an address and how to navigate to it.
The address used in this example is
1 Cheyne Walk Street
Horley
Surrey
AB1 2CD,
United Kingdom.
Note: The above address is fictitious and used as an example only.
Tip: Before you enter your destination address, ensure that you have set your route preferences. For more information, see
“
Route Options” on page 68.
1. Open the Destination Search screen
The Destination Search screen will display.
Note: If this is the first time you are setting your destination and you have maps from more than one country installed,
then the Select a map screen will display instead of the Destination Search screen. Go directly to step 2b. The next time
you perform this procedure, the Destination Search screen will open as expected.
23
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default
and cannot be changed. Go to step 3.
a) From the Destination Search screen, tap
.
The Select a map screen will display.
b) Select United Kingdom from the list.
The Destination Search screen will display.
3. Search for the City/Area
a) From the Destination Search screen, tap City/Area.
The Keyboard screen will display.
b) Use the Keyboard screen to search for Horley as the city or area of your destination, then tap the
search result.
The Destination Search screen will display.
4. Search for the street name and house number
a) From the Destination Search screen, tap Street Address.
The Keyboard screen will display.
24
Using the
Keyboard
screen
The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results
will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will
display.
The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet,
number, alternate characters and combinations of these.
You can also choose the type of keyboard you prefer from alphabetic, QWERTY and keypad. For more information, see
“Keyboard” on page 87.
As you select each character, the first two results will display. Tap , then scroll to see more search results.
z To select a character or a search result, tap the character or search result.
z To delete a character, tap .
z To display more characters, tap 123, alt or abc, if available.
Using the
Destination Search
screen
The Destination Search screen is used to select your destination by area, street, Points of Interest, intersection, city, area, state
or country.
As you specify each part of the address, it will display at the top of the screen.
The available options will change to reflect the parts of the address still to be completed.
25
b) Use the Keyboard screen to enter Cheyne Walk as the street name of your destination, then tap the
search result.
Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring
areas, and common street names will produce search results ordered by their city or area name.
c) Use the Keyboard screen to enter 1 as the house number of your destination, then tap the search
result. The Preview screen will display.
Note: If house numbers are available, but not the one that you require, you may have to choose the same street in a
neighbouring area. Tap
and select another search result. If house numbers are not available for your selected
section of the street the Preview screen will display.
d) Complete the following:
If you want to ... Then ...
navigate to your selected destination tap .
Your route is calculated; the 3D Map screen will display.
view the position on the map screen tap the map to display the position on the 2D Map screen.
view more information about your
destination
tap More.
The Destination Details screen will display.
add the destination to a multi-stop trip tap Add.
The Multi-stop Trip Planner screen will display. The address is listed as a waypoint
on the multi-stop trip. See “
How do I create a trip with multiple stops?” on page
26.
save the destination as My Home tap Save.
The New Favourite screen will display.
tap Save as My Home.
save the destination as a favourite tap Save.
The New Favourite screen will display.
tap Save as Favourite.
26
How do I create a trip with multiple stops?
You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will
be calculated to go via each of these points in the specified order.
Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location, then Add to Trip from
the pop-up Map menu on the 2D Map or 3D Map screen. You can save up to 198 multi-stop trips, each with up
to 14 waypoints.
Note: Waypoints added, updated or deleted after a multi-stop trip has commenced will not affect the current route.
Quick Steps
1. Start your Multi-stop trip
2. Select the country
3. Search for the city/area
4. Search for the street and house number
5. Add additional waypoints
6. Tap
.
Case Study: How do I navigate to multiple addresses?
This case study will show you how to set a multi-stop trip by entering multiple waypoints.
The address used in this example is:
1 Cheyne Walk Street
Horley
Surrey
AB1 2CD,
United Kingdom.
Note: The above address is used as an example only.
Tip: Before you enter your destination address, ensure that you have set your route preferences. For more information, see
“
Route Options” on page 68.
1. Open your Multi-stop Trip screen
The Multi-stop Trip Planner screen will display.
27
a) Tap Add.
The Add to Trip Menu will display.
b) Tap Address.
The Destination Search screen will open.
Note: You can also add waypoints using favourites, recent destinations, POI locations and Navpix
TM
.
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default
and cannot be changed. Go to step 3.
a) From the Destination Search screen, tap .
The Select a map screen will display.
b) Select United Kingdom from the list.
The Destination Search screen will display.
3. Search for the City/Area
a) From the Destination Search screen, tap City/Area.
The Keyboard screen will display.
b) Use the Keyboard screen to search for Horley as the city or area of your destination, then tap the
search result.
The Destination Search screen will display.
28
4. Search for the street name and house number
a) From the Destination Search screen, tap Street Address.
The Keyboard screen will display.
b) Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap
the search result.
Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring
areas, and common street names will produce search results ordered by their city or area name.
c) Use the Keyboard screen to enter 1 as the house number of your destination.
The Preview screen will display.
Note: If house numbers are available, but not that you require, you may have to choose the same street in a neighbouring
area. If house numbers are not available for your selected section of the street the Destination Preview screen will display.
d) Tap Add.
The waypoint is automatically saved and the Multi-stop-Trip screen will display.
29
e) Complete the following:
If you want to ... Then ...
add another waypoint
Note: Waypoints added after a multi-stop trip has
commenced will not be included in the current route.
tap Add.
The Add To Trip Menu will display.
return to step 1a.
navigate to your selected destination tap
The Preview screen will display.
tap .
The 3D Map screen will display the calculated route.
change the order of your waypoints tap a destination point to move.
The Preview screen will display.
tap Up or Down.
The Multi-stop Trip Planner screen will redisplay.
delete all waypoints tap Clear.
delete one waypoint tap a destination point to delete.
The Preview screen will display.
tap Delete.
The Multi-stop Trip Planner screen will redisplay.
How do I skip a waypoint during a multi-stop trip?
To skip a waypoint during a multi-stop trip, complete the following:
1. Tap the map.
The Map Menu will display.
2. Tap Route, then Skip Waypoint.
The next waypoint will be skipped and the route recalculated to the following waypoint.
30
How do I search for a Point of Interest (POI)?
A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are
grouped by type, such as petrol stations, parking, beaches and museums.
Select a POI using the Destination Search, Keyboard and Preview screens, which used together to form a
POI-entry wizard.
Tip: You can also quickly search for certain POIs based upon your current location via the Main Menu screen.
This section provides a case study to help guide you through finding or setting your POI as a destination.
Quick Steps
1. Open the Destination Search screen
2. Select a country
3. Search for the City/Area
4. Search for a POI
5. Tap
.
Case Study: How do I search for a Point of Interest?
This case study will show you how to enter an address and navigate to it.
The address used in this example is:
Waterloo Railway Station
Road (A301), Waterloo
London
SE1 8UD
United Kingdom.
Note: The above address is fictitious and used as an example only.
1. Open the Destination Search screen
The Destination Search screen will display.
Note: If this is the first time you are setting your destination and you have maps from more than one country installed,
then the Select a map screen will display instead of the Destination Search screen. Go directly to step 2b.
The next time you perform this procedure, the Destination Search screen will open as expected.
31
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default
and cannot be changed. Go to step 3.
a) From the Destination Search screen, tap .
The Select a map screen will display.
b) Select United Kingdom from the list.
The Destination Search screen will display.
3. Search for the city/area
a) From the Destination Search screen, tap City/Area.
The Keyboard screen will display.
b) Use the Keyboard screen to search for London as the city or area of your destination, then tap the
search result.
The Select POI Category screen will display.
Tip: The list of categories is divided into Enabled Categories which are set to display an icon on the map screens, and
Other POI Categories which will not display an icon.
32
4. Search for a POI
a) Either tap Search by name to search in all POI categories, or select a category from the list.
The Keyboard screen will display.
b) Use the Keyboard screen to search for Waterloo Railway Station as your destination, then tap the
search result.
The Preview screen will display.
c) Complete the following:
If you want to ... Then ...
navigate to your selected destination tap .
Your route is calculated and displayed on the 3D Map screen.
view your position on the map screen tap the map to display the position on the 2D Map screen.
view more information about your
destination
tap More.
The Destination Details screen will display.
add the destination to a multi stop
trip
tap Add.
The Multi-stop Trip Planner screen will display. The address is listed as a waypoint on
the multi-stop trip. See “
How do I create a trip with multiple stops?” on page 26.
save the destination as My Home tap Save.
The New Favourite screen will display.
tap Save as My Home.
save the destination as a favourite tap Save.
The New Favourite screen will display.
tap Save as Favourite.
33
How do I save Favourites and My Home?
You can save up to 200 destinations as favourites, one of which can be saved as My Home.
You can save a favourite from the Preview screen after searching for an address, or from the Map Menu on the
3D or 2D Map screens. For more information, see “
How do I use the Map Menu?” on page 48.
Can I save a
NavPix
TM
to a Favourite?
You can save a NavPix
TM
to any of your existing favourites. For more information, see “How do I save a
NavPix
TM
to a favourite?” on page 59.
How do I save a Favourite or My Home?
1. Search for an address until the Preview screen is displayed.
2. Tap Save.
The New Favourite screen will display.
3. To change the name of the favourite, tap
.
The Keyboard screen will display.
4. After you have entered a name for the favourite, tap
.
The New Favourite screen will display.
5. Complete the following:
If you want to ... Then ...
save as a Favourite tap Save as Favourite.
The favourite is saved. The Favourite Preview screen will display. See “
How do I navigate to a
Favourite?” on page
34.
save as My Home tap Save as My Home.
The favourite is saved as My Home. The My Home Preview screen will display. See “
How do I navigate
to My Home?” on page
34.
34
How do I navigate to a Favourite?
1. Tap the Favourite destination you want to travel to.
The Favourite Preview screen will display.
2. Tap
.
Your Navman will calculate the route from your current location. The 3D Map screen will display.
How do I navigate to My Home?
If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted
to search for an address using the address-entry wizard.
Option 1 - Via the Main Menu
Your Navman will calculate the route from your current location. The 3D Map screen will display.
Option 2 - Via the
Favourite Destinations
screen
1. From the Favourite Destinations screen, select My Home.
The My Home Preview screen will display.
2. Tap
.
Your Navman will calculate the route from your current location. The 3D Map screen will display.
35
How do I edit the name of a Favourite?
1. From the Favourite Destinations screen, select a favourite to edit.
The Favourite Preview screen will display.
2. Tap Edit.
The Edit Name screen will display.
3. To edit the name of the favourite, tap
.
4. After you have edited the favourite name, tap
.
The Edit Name screen will display as shown in point 2.
5. Complete the following:
If you want to ... Then ...
rename the Favourite tap Save.
The favourite is saved. The Favourite Preview screen will display.
save as My Home tap Save as My Home.
The favourite is saved as My Home. The My Home Preview screen will display.
36
How do I delete a Favourite?
1. From the Favourite Destinations screen, select a favourite to delete.
The Favourite Preview screen will display.
2. Tap Delete. When the Caution dialog-box opens, tap Yes to confirm.
The favourite is deleted. The Favourite Destinations screen will display.
37
How do I navigate to a recent location?
To make navigating to an address easier, your Navman will automatically save all your start locations and
destinations in a list of recent locations.
1. Tap a recent location.
The Recent Location screen will display.
2. Complete the following:
If you want to ... Then ...
calculate the route and open the 3D Map screen Tap .
The 3D Map screen will display.
view the full address details of the recent location tap More.
The Recent Destination Details screen will display.
save the recent location as My Home tap Save.
The New Favourite screen will display.
tap Save as My Home.
save the recent location as a favourite tap Save.
The New Favourite screen will display.
tap Save as Favourite.
38
How do I view my route?
When a route has been calculated, the 3D Map screen will display. You will be directed to your destination by
spoken and visual instructions.
The Map button cycles through the 3D Map, 2D Map, Traffic Overview (if available on your model), Route
Overview and Turn-by-Turn™ screens.
3D Map screen
The 3D Map screen displays your current position and follows your direction of travel.
Tap and drag the screen, to move across the map.
Tap the map to view the Map Menu (see “How do I use the Map Menu?” on page 48).
Note: Depending on the country you are travelling in, the colour of the direction and distance buttons may differ from the
above example.
Item Description
Next instruction The direction and name of the street to turn in to.
Direction and distance of
next turn
The direction and distance to your next turn.
Note: To repeat the spoken prompt of your next turn, tap the turn arrow.
Route Your current route is highlighted.
Current position
Your current position is marked with
.
Speed indicator Displays when you exceed your set speed limit. For more information, see “
Driver Alerts
4/5” on page
71.
Status bar Displays one of the following:
z The name of the street you are located on
z Speed warnings
z Active POIs.
Tap to display the Main Menu screen.
Note: The Status Bar is replaced by current Traffic events, when Traffic is enabled. For
more information, see “
Traffic” on page 83.
Main Menu The Main Menu button allows you to enter an address for your destination and
customise preferences.
39
Item Description
Distance and Time
Information
Tap to expand and see the following options:
z Time
z km/h or mph (Speed)
z TTG (Time to Go)
z DTG (Distance to Go)
z ETA (Estimated Time of Arrival).
Tap to cycle through the options
Cancel route Cancels your current route.
Zoom
To view zoom options, tap
.
To zoom out, tap
.
To zoom in, tap
.
Map The Map button allows you to cycle through different map screens.
Mute/unmute volume,
TMC*, battery and GPS
information.
Tap
to expand and see the following options:
Mute/unmute volume
TMC traffic status indicator. For more information, see “How does my
Navman receive traffic information?” on page
61.
Battery charge indicator
GPS status indicator
The icon displays green when a GPS fix is established and red when a GPS fix
is unavailable. To indicate the reception strength of a GPS fix between one
and four green vertical bars are displayed.
* TMC feature is not available on all models.
40
2D Map screen
The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route
has been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel
unless the Map Display preference is set to North (see “
Map Display” page 73).
Tap and drag the screen, to move across the map.
Tap the map, to view the Map Menu (see “How do I use the Map Menu?” on page 48).
Note: Depending on the country you are travelling in, the colour of the direction and distance buttons may differ from the
above example.
Item Description
Next instruction The direction and name of the street to turn in to.
Direction and distance
of next turn
The direction and distance to your next turn.
Note: To repeat the spoken prompt of your next turn, tap the turn arrow.
Route Your current route is highlighted.
Current position
Your current position is marked with
.
Status bar Displays one of the following:
z The name of the street you are located on
z Speed warnings
z Active POIs.
Tap to display the Main Menu screen.
Note: The Status Bar is replaced by current Traffic events, when Traffic is enabled. For
more information, see “
Traffic” on page 83.
Main Menu The Main Menu button allows you to enter an address for your destination and customise
preferences.
Distance and Time
Information
Tap to expand and see the following options:
z Time
z km/h or mph (Speed)
z TTG (Time to Go)
z DTG (Distance to Go)
z ETA (Estimated Time of Arrival).
Tap to cycle through the options
41
Item Description
Cancel route Cancels your current route.
Zoom
To view zoom options, tap
.
To zoom out, tap
.
To zoom in, tap
.
Map The Map button allows you to cycle through different map screens.
Mute/unmute volume,
TMC*, battery and GPS
information.
Tap
to expand and see the following options:
Mute/unmute volume
TMC traffic status indicator. For more information, see “How does my
Navman receive traffic information?” on page
61.
Battery charge indicator
GPS status indicator
The icon displays green when a GPS fix is established and red when a GPS fix is
unavailable. To indicate the reception strength of a GPS fix between one and
four green vertical bars are displayed.
* TMC feature is not available on all models.
42
Traffic Overview screen (select models only)
Note: Traffic information is only available on selected model and in selected countries.
The Traffic Overview screen displays a general overview of the traffic situation on your route, including all
events in the immediate vicinity.
Tap and drag the screen, to move across the map.
Tap the map, to view the Map Menu (see “How do I use the Map Menu?” on page 48)
Item Description
Your final destination
Event icon Displays icon to indicate type of event
Current position
Your current position is marked with
.
Tap to display the Event List screen
Status bar Displays one of the following:
z The name of the street you are located on
z Speed warnings
z Active POIs.
Tap to display the Main Menu screen.
Note: The Status Bar is replaced by current Traffic events, when Traffic is enabled. For more
information, see “
Traffic” on page 83.
Tap to display the Traffic System Status screen.
Cancel route Cancels your current route.
Zoom
To view zoom options, tap
.
To zoom out, tap
.
To zoom in, tap
.
Map The Map button allows you to cycle through different map screens.
43
Item Description
Mute/unmute
volume, TMC*,
battery and GPS
information.
Tap
to expand and see the following options:
Mute/unmute volume
TMC traffic status indicator. For more information, see “How does my Navman
receive traffic information?” on page
61.
Battery charge indicator
GPS status indicator
The icon displays green when a GPS fix is established and red when a GPS fix is
unavailable. To indicate the reception strength of a GPS fix between one and
four green vertical bars are displayed.
* TMC feature is not available on all models.
44
Route Overview screen
The Route Overview screen gives you a bird’s eye view of your trip.
Note: A route must first have been calculated for this screen to be available.
Tap and drag the screen, to move across the map.
Tap the map to view the Map Menu (see “How do I use the Map Menu?” on page 48).
Note: Depending on the country you are travelling in, the colour of the direction and distance buttons may differ from the
above example.
Item Description
Next instruction The direction and name of the street to turn in to.
Direction and
distance of next turn
The direction and distance to your next turn.
Note: To repeat the spoken prompt of your next turn, tap the turn arrow.
Your final destination
Route Your current route is highlighted.
Current position
Your current position is marked with
; if visible.
Scale bar Displays map scale.
Main Menu The Main Menu button allows you to enter an address for your destination and customise
preferences.
Status bar Displays one of the following:
z The name of the street you are located on
z Speed warnings
z Active POIs.
Tap to display the Main Menu screen.
Note: The Status Bar is replaced by current Traffic events, when Traffic is enabled. For more
information, see “
Traffic” on page 83.
45
Item Description
Distance and Time
Information
Tap to expand and see the following options:
z Time
z km/h or mph (Speed)
z TTG (Time to Go)
z DTG (Distance to Go)
z ETA (Estimated Time of Arrival).
Tap to cycle through the options.
Cancel route Cancels your current route.
Zoom
To view zoom options, tap
.
To zoom out, tap
.
To zoom in, tap
.
Map The Map button allows you to cycle through different map screens.
Mute/unmute
volume, TMC*,
battery and GPS
information.
Tap
to expand and see the following options:
Mute/unmute volume
TMC traffic status indicator. For more information, see “How does my Navman
receive traffic information?” on page
61.
Battery charge indicator
GPS status indicator
The icon displays green when a GPS fix is established and red when a GPS fix is
unavailable. To indicate the reception strength of a GPS fix between one and
four green vertical bars are displayed.
* TMC feature is not available on all models.
46
Turn-by-Turn screen
The Turn-by-Turn screen displays the next four turns of your route, the turn direction, the street name and the
distance to the turn. You can view all the turns in the list, using the up and down arrows.
Note: A route must first have been calculated for this screen to be available.
Note: Depending on the country you are travelling in, the colour of the direction and distance buttons may differ from the
above example.
Item Description
Direction of turn The direction of the turn. Your next turn is highlighted.
Note: To Repeat the spoken prompt of your next turn, tap the turn arrow.
Distance to turn The distance to your next turn. Your next turn is highlighted.
Instruction The direction and name of the street to turn in to. Your next turn is highlighted.
Next turn Your next turn is at the top of the list.
Upcoming turns The direction and distance of upcoming turns.
Main Menu The Main Menu button allows you to enter an address for your destination and customise
preferences.
Status bar Displays one of the following:
z The name of the street you are located on
z Speed warnings
z Active POIs.
Tap to display the Main Menu screen.
Note: The Status Bar is replaced by current Traffic events, when Traffic is enabled. For more
information, see “
Traffic” on page 83.
47
Item Description
Distance and Time
Information
Tap to expand and see the following options:
z Time
z km/h or mph (Speed)
z TTG (Time to Go)
z DTG (Distance to Go)
z ETA (Estimated Time of Arrival).
Tap to cycle through the options
Scroll buttons Allow you to view each turn by moving up and down through the list.
Map The Map button allows you to cycle through different map screens
Mute/unmute
volume, TMC*,
battery and GPS
information.
Tap
to expand and see the following options:
Mute/unmute volume
TMC traffic status indicator. For more information, see “How does my Navman
receive traffic information?” on page
61.
Battery charge indicator
GPS status indicator
The icon displays green when a GPS fix is established and red when a GPS fix is
unavailable. To indicate the reception strength of a GPS fix between one and
four green vertical bars are displayed.
* TMC feature is not available on all models.
48
How do I use the Map Menu?
The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screens.
Displaying the
Map Menu
1. Tap to display the 3D Map or 2D Map screen.
2. Tap and drag to move around the map to your selected location.
3. Tap the map.
The Map Menu will display.
Map Menu
options
The following options are available via the Map Menu:
Menu Option Description
Navigate To Calculates a route from your current location, if your Navman has a GPS fix.
Show Details Displays the Preview screen from where you can:
z View details of the location
z Add the location to your multi-stop trip
z Saves the location as a favourite
z Navigate to the location
Nearest POI Displays the Select POI Category screen. Select the Category, then Search for a POI to navigate to. For
further information, see “
How do I search for a Point of Interest (POI)?” on page 30.
Avoid Area Allows you to add an Avoid Area by tapping and dragging the map. For further information, see “How do I
add an Avoid Area?” on page
49.
Un-Avoid Area Deletes the selected Avoid Area. For further information, see “How do I delete an Avoid Area?” on page
49.
Add to Trip Adds the location to your multi-stop trip.
Route Displays the Route sub-menu from where you can:
Set as Start. Sets the location as your departure point.
Demonstrate. Starts the route demonstration, demonstrating navigation from your current position or
departure point.
Stop Demonstration. Stops the route demonstration.
Skip Waypoint. Skips the next stop on your multi-stop trip.
Show Summary. Displays a summary of your route, including your departure and destination addresses,
total distance and total estimated time to your destination.
Detour. Detours your route to avoid the next 1, 2, 5, 10 or 20 kilometres.
49
How do I avoid an area?
Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded
areas.
CAUTION:
If no alternative route around an Avoid Area exists, the route calculation will fail.
If your destination is in an Avoid Area, your Navman will navigate you into that Avoid Area.
How do I add an Avoid Area?
1. Tap the 3D Map or 2D Map screen to display the Map Menu.
2. Select Avoid Area.
3. Tap and drag to set the Avoid Area to the correct size and position.
The Avoid Area is added.
How do I delete an Avoid Area?
1. Find the Avoid Area that you want to delete.
2. Tap the Avoid Area to display the Map Menu.
3. Select Un-Avoid Area.
The Avoid Area is deleted.
How do I delete all Avoid Areas?
The Saved Information screen will display.
1. Tap Delete Avoid Areas.
2. When the Caution dialog-box opens, tap Yes to confirm.
All Avoid Areas are permanently deleted.
50
How do I preview a route?
Route demonstration allows you to:
Preview a route.
Plan and view a route without a GPS fix, such as when you are inside a building.
The following steps will show you how to preview one route.
1. Select a departure point
If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route
to start elsewhere.
a) Tap the 3D Map or 2D Map screen at your desired departure point.
The Map Menu will display.
b) Tap Route.
The Route submenu will display.
c) Tap Set As Start.
The Map Menu will close, and the selected point is set as your departure point.
2. Select a destination point
Set a destination either by using the address entry wizard or by using the Map Menu:
a) Locate your destination.
b) Tap your destination to display the Map Menu.
c) Tap Navigate To.
The Map Menu will close and the map screen will display the calculated route.
3. Demonstrate the route
Once the route has been determined, you can demonstrate the route by completing the following:
a) Tap the map screen to display the Map Menu.
b) Tap Route.
The Route submenu will display.
c) Tap Demonstrate.
The Map screen will display the calculated route in Route Demonstration mode.
51
How do I view my route statistics?
Note: This feature is not available on all models.
The Mio provides information on your:
distance travelled
average speed
maximum speed
time taken for trip
stationary time.
Trip information is presented in two different ways. These are:
information for the current trip
information for all trips to date, or since the tripmeter was last reset.
How do I view statistics on my current route?
The Tripmeter - Current Route screen is used to view statistical information for your current trip.
Note: A long press on the top right button of the main map screen will also shortcut to this feature.
The Tripmeter - Current Route screen will display.
Complete the following:
If you want to ... Then ...
view statistics for your trips to date
tap
to display the Tripmeter - Global screen.
reset the tripmeter tap Reset.
tap Yes to reset.
The Tripmeter - Current Route screen will display
52
How do I view statistics of my trips to date?
The Tripmeter - Global screen is used to view statistical information for all of your trips to date, or since the trip
meter was last reset.
The Tripmeter - Global screen will display.
Complete the following:
If you want to ... Then ...
view your trip logs
tap
to display the Trip Recorder screen.
view statistics for your current route
tap
to display the Tripmeter - Current Route screen.
reset the tripmeter tap Reset.
A Warning dialog box will display.
tap Yes to reset.
The Tripmeter - Global screen will display.
53
How do I view my trip logs?
Note: Trip Recorder is only available on some models.
The Trip Recorder screen is used to record trip logs of your current trip. The Trip Recorder only records trip logs
if you have chosen to record the logs.
The Trip Recorder screen will display.
Complete the following:
If you want to ... Then ...
view statistics for your current route
tap
twice to display the Tripmeter - Current Route screen.
stop recording your trip logs tap Stop Logging.
delete your trip logs tap Stop Logging.
tap Delete Logs to remove the logs.
54
How do I use NavPix
TM
?
Note: NavPix
TM
functionality is only available on some models.
Pictures with a GPS fix are called NavPix
TM
and can be used to navigate to the photographed location.
How do I manage my
NavPix
TM
?
Album management
The albums contain all your NavPix
TM
and display them as thumbnails. You can store your NavPix
TM
in
customizable albums on the Navman internal memory.
Element Description
Browse Displays the Select an Album screen, from where you can select another album.
Delete Deletes selected
NavPix
TM
from the displayed album.
Displays the previous screen.
Album title The title of the album. Tapping this bar allows you to return to the main menu.
NavPix
TM
thumbnail
A
NavPix
TM
thumbnail in the displayed album:
z To select a NavPix
TM
, tap the thumbnail. The NavPix
TM
Details screen will display
z To select multiple NavPix
TM
, tap and hold the first thumbnail, then drag across the
other thumbnails.
When a
NavPix
TM
is selected it displays with a green border.
Note: If the
NavPix
TM
has been given a title it will display beneath the NavPix
TM
. If the
NavPix
TM
has not been given a title, the file name of the NavPix
TM
will display.
Scroll buttons Use the scroll buttons to scroll through the
NavPix
TM
.
Displays if the picture is a
NavPix
TM
, with embedded GPS coordinates.
55
How do I delete NavPix
TM
from an Album?
NavPix
TM
can be deleted from an Album on your Navman internal memory.
Note: When a NavPix
TM
has been saved as a Favourite destination, you will not delete the Favourite if you subsequently
remove the
NavPix
TM
.
1. From the Album screen, tap Browse.
The Select an Album screen will display.
2. Select the Album you want to view.
3. Tap and hold, then drag across the screen to select the
NavPix
TM
you want to delete.
As each
NavPix
TM
is selected, a green border will appear around it.
To cancel a selection, tap and drag across the NavPix
TM
again.
4. When you have finished the selection, tap Delete.
5. A warning screen will display, asking you to confirm or cancel the procedure.
If confirmed, the
NavPix
TM
will be deleted.
Tip: You can also delete a single NavPix
TM
via the Photo Details screen.
56
NavPix
TM
management
The NavPix
TM
Details screen displays information about your NavPix
TM
. Tap a NavPix
TM
to display the
Photo Details screen.
Element Description
Thumbnail A thumbnail of the
NavPix
TM
.
Tap to display the
NavPix
TM
in full-screen.
NavPix Title The title of the
NavPix
TM
; tap Edit to add a title or edit the existing title.
Show on Map When selected, displays an icon on the map at the location the
NavPix
TM
was taken.
Note: Show on map is available only if this is a
NavPix
TM
with embedded GPS
coordinates.
Tap to return to your album.
Time / Date and Location
Coordinates
Displays the time and date the
NavPix
TM
was taken. Displays the GPS coordinates if
available.
Tap the scroll buttons to scroll through your album.
Assign Allows you to save a
NavPix
TM
to an existing favourite or as a POI, if GPS coordinates
are associated with the
NavPix
TM
.
Edit Allows you to edit the name of the
NavPix
TM
using the Keyboard screen.　
Delete Deletes a
NavPix
TM
from the album on your Navman.
Your route will be calculated and displayed on the 3D Map screen.
Note: This button is only available if this is a
NavPix
TM
with embedded GPS
coordinates.
57
How do I view a NavPix
TM
in full-screen?
1. From the NavPix
TM
Details screen, tap the thumbnail of the NavPix
TM
.
The
NavPix
TM
will appear in full-screen.
Note: The icons disappear after a few seconds; tap the screen to have them reappear.
2. Complete the following:
If you want to ... Then ...
zoom into the NavPix
TM
Tap
zoom out of the NavPix
TM
Tap
rotate the NavPix
TM
Tap
. The NavPix
TM
will rotate 90 degrees anticlockwise each time
is
tapped; the
NavPix
TM
is saved at the new angle.
view parts of the NavPix
TM
not
displayed on-screen
tap and hold the NavPix
TM
, then drag across the screen.
return to the NavPix
TM
Details
screen
Tap
scroll through your NavPix
TM
Tap
How do I add or edit a NavPix
TM
description?
A descripton can be added to your NavPix
TM
or an existing descripton can be edited. The description can be a
maximum of 34 characters.
1. From the
NavPix
TM
Details screen, tap Edit.
The Keyboard screen will display.
2. Tap each character as required.
The description will appear at the top of the screen
3. When the description is completed, tap
.
The
NavPix
TM
Details screen will display, with a new description under the thumbnail.
Note: A description can be added to your NavPix
TM
or an existing description can be edited only if you have saved the
NavPix
TM
as a POI or as a favourite. For more information see “How do I save a NavPix
TM
to a favourite?” on page 55 or “How
do I save a
NavPix
TM
to a POI?” on page 60.
58
How do I navigate to a
NavPix
TM
?
Your Navman contains preinstalled NavPix
TM
that you can navigate to. If you have not yet navigated to a
NavPix
TM
, three of the preinstalled NavPix
TM
will display on the Go To NavPix
TM
screen. Otherwise, three
of your recently used
NavPix
TM
are displayed.
Note: To navigate to a NavPix
TM
location, either a GPS fix must have been available when the NavPix
TM
was taken.
How do I navigate to a recent NavPix
TM
?
1. Tap the
NavPix
TM
you want to navigate to.
The Preview screen will display.
2. Tap
.
Your Navman will calculate the route from your current location. The 3D Map screen will display.
How do I navigate to a NavPix
TM
I have downloaded, or was preinstalled?
1. Tap a
NavPix
TM
.
The
NavPix
TM
Details screen will display.
2. Tap
.
Your Navman will calculate the route from your current location. The 3D Map screen will display.
59
How do I save a
NavPix
TM
to a favourite?
Note: When a NavPix
TM
is saved to an existing favourite, only the image, and not the GPS coordinates, are associated with the
favourite.
1. From the Album screen, select and tap a
NavPix
TM
.
The
NavPix
TM
Details screen will display.
2. From the
NavPix
TM
Details screen, tap Assign.
The Save Photo screen will display.
3. Complete the following:
If you want to ... Then ...
edit the name of the favourite
tap
.
The Keyboard screen will display.
Enter a name for your Favourite, then tap
save the NavPix
TM
as a
Favourite (when GPS
coordinates are associated
with a picture)
tap Save as Favourite and select A new favourite from the list.
The
NavPix
TM
is saved as a new Favourite and the Photo Details screen will display.
Note: You cannot save a
NavPix
TM
as a favourite if GPS coordinates are not available.
save a picture to an address tap Save as Favourite and select a favourite from the list.
The
NavPix
TM
is saved to a favourite and the Photo Details screen will display.
60
How do I save a
NavPix
TM
to a POI?
Note: Only a NavPix
TM
with embedded GPS coordinates can be saved as a POI.
1. From the Album screen, select and tap a NavPix
TM
.
The
NavPix
TM
Details screen will display.
2. From the
NavPix
TM
Details screen, tap Assign.
The Save Photo screen will display.
3. Tap Save as POI.
The Select POI Categories screen will display.
4. Complete the following:
If you want to ... Then ...
edit the name of the POI
tap
.
The Keyboard screen will display.
Enter a name for your POI, then tap
save the NavPix
TM
as a POI (when GPS
coordinates are associated with a picture)
tap Save as POI and select POI Category from the list, then tap
.
Note: You cannot save a
NavPix
TM
as a favourite if GPS coordinates are
not available.
create a new custom POI category and save a
NavPix
T
as a POI
tap New category to create a custom POI category.
The Keyboard screen will display.
Enter a name for your POI category, then tap
.
The Select POI Categories screen will display the new POI category.
select the POI Category from the list, then tap
.
61
How do I receive current traffic information? (Select models
only)
Note: Traffic information is only available on selected model and in selected countries.
Your Navman can receive current traffic information for all main roads and motorways, enabling you to avoid
potential delays on your route. Event messages and traffic icons will display as they occur. If an event message
obscures your current location, the map will adjust to display both the message and your location.
How does my Navman receive traffic information?
You can receive current traffic information on your Mio via an optional traffic accessory. The TMC service is
subscription-free.
Note: To receive traffic information, you must connect your Navman to the in-car charger.
The Traffic Message Channel (TMC) broadcasts real-time traffic and weather information via the FM Radio Data
System (RDS). FM radio stations transmit TMC data on a cycle of several minutes, with hundreds of events able
to be broadcast to TMC receivers, such as the Navman Traffic module.
Traffic status
Your current traffic status is indicated by the colour of the TMC icon.
To view your current traffic status from the map screens, tap
and then tap .
The following table describes the three traffic status icons:
Traffic Status Description
The TMC status is grey if traffic is currently inactive due to one of the following conditions:
z Your Navman or Traffic module is connecting to the TMC service.
z Your Navman or Traffic module cannot receive TMC data. This may be due to poor radio coverage in
the local vicinity.
z You are in a country that is not supported by the Navman Traffic module.
Tap to display the Traffic Overview screen.
The TMC status is orange if one of the following conditions apply:
z You have navigated into a country that is not supported by Navman Traffic, but there are still traffic
events listed on the Event List screen.
z You have separated your Navman from the Navman Traffic module, or the Navman Traffic module
is not receiving power but there are still traffic events listed on the Event List screen.
Tap to display the Traffic Overview screen.
The TMC status is green if your Navman or Traffic module is active and receiving traffic events. Tap to
display the Traffic Overview screen.
Your traffic status is displayed in more detail on the Traffic System Status screen.
62
How will I know when a Traffic Event occurs?
Incoming events are handled according to your Traffic preferences. For more information, see “Traffic” on page
83.
When travelling through an area in which you can receive traffic status, your Navman will decode these events
and display them on-screen. An icon will display at the event location on the map screens, and an audible
warning is given if an event is on your route. Where the extent of an event is a specific distance, the road will be
highlighted and arrows will indicate the direction affected.
A message will display at the bottom of the screen with the road name, the section of road affected and the
type of event that has occurred. The message remains on screen for 8 seconds and is added to the Event List.
63
How do I view a list of all events on my route?
Your Navman creates a list of events as they are received, which is displayed on the Event List screen. This
screen can only be viewed if the TMC icon is green or orange.
From the Traffic Overview screen, tap
.
Item Description
Event description Displays details of the Event, including:
z Name of road and direction in which Event is taking place.
z Location of where Event begins and ends.
> indicates an Event from a location, to a location.
<> indicates an Event between locations.
z Type of Event.
Event icon Displays icon to indicate type of event. See page 128 to view list of icons.
Tap to return to the previous screen.
Tap to display the Select event sorting type screen, where you can sort events by distance,
road name or age.
Position indicator Displays your position in the Event List screen
Scroll buttons Allow you to view all events by moving up and down through the list.
Event number Displays the number of events in current list.
64
How do I view traffic details?
There are several ways to view details of an event received by your Navman.
Choose one of the following:
Location Option
From any of the screens used to
view your route
Tap the Event message when it appears on screen.
The Event Details screen will display.
From the Traffic Overview screen
Tap
.
The Event List screen will display.
Select and tap the event you want to view.
The Event Details screen will display.
From the Map Menu Tap and hold the traffic icon, which displays at the location of the event.
The Map View menu will display.
Tap Show Details.
The Event Details screen will display.
Item Description
Event description Displays details of the Event, including:
z Name of road and direction in which Event is taking place.
z Location of where Event begins and ends.
> indicates an Event from a location, to a location.
<> indicates an Event between locations.
z Type of Event.
Event icon Displays icon to indicate type of event. See page 128 to view list of icons.
Detour information Displays details of detour recommendation, if any. For more information, see “
How do I
know if a detour is recommended?” on page
65.
Tap to return to the previous screen.
Tap
to view next Event in list.
Tap
to view previous Event in list.
Event number Displays the number of the event currently displayed and the total number of events in the
list.
65
Item Description
Tap to initiate a new route to avoid the event.
Only available if a detour or re-route is available.
Note: Un-avoid area is represented by
and is displayed when a re-route has
been calculated.
How do I know if a detour is recommended?
When a Traffic or Clearance event occurs on your route, a detour will always be recommended. The detour
event message will display in the status bar on map screens.
Note: Detours are only recommended for Traffic or Clearance Events on a calculated route.
How do I avoid an event on my route?
From the Traffic Overview screen, tap .
1. From the Event List screen, tap the event.
The Event Details screen will display.
2. If a detour has been calculated to avoid an event on your route,
is available; tap to accept the
new route and avoid the event.
The 3D Map screen will display.
How do I cancel a detour around an event on my route?
If you have chosen to avoid an event and a new route has been calculated, you can cancel the detour around
the event and return to your original route.
1. From the Event List screen, tap the Event you want to un-avoid.
The Event Details screen will display.
2. Re-route information displays at the bottom of the screen.
If a re-route has been calculated, is available; tap to accept the new route.
The 3D Map screen will display.
How do I automatically avoid all traffic and clearance events on my route?
To automatically avoid all traffic and clearance events see Traffic preferences on page 83.
66
Traffic Messages
The Event Details screen displays detour status information.
Detour Not Available messages
If a detour is not available, one of the following messages will display:
Message Description
This Event is not locatable
This clearance is not locatable
A specific location for the Event cannot be identified.
This Event does not affect your route
This clearance does not affect your route
The Event is not on the current leg of your journey, or is behind your current
position.
You are avoiding this Event
You have accepted this clearance
The Event is not on the current leg of your journey.
You are too distant to re-route
You are too distant to accept this clearance
The Event is currently too distant to affect your journey.
Detour not found
Clearance route not found
A detour / re-route could not be calculated.
Detour recommended messages
If a detour is recommended, one of the following messages will display:
Message Description
Finding detour…
Recalculating route…
Your Navman is calculating a new route. During calculation, the % complete will display.
Note: Exiting this screen before the new route is calculated will cancel the operation.
Detour distance…
Clearance change
A detour has been calculated.
The difference between the distance of your current route and the proposed route is displayed.
67
What can I customise?
There are various customisation options available to enhance your navigation experience.
Note: The Preferences screens may differ from those displayed above, depending on your Navman model.
To move forward through the Preferences screens, tap .
To revisit the previous screen, tap
68
Route Options
You can enhance your navigation experience by modifying aspects of your route and route calculation.
Route Calculation 1/5
Complete the following:
If you want to ... Then ...
change the route type move the Route Type slider towards Fastest time to give high priority to the fastest time
when calculating a route.
move the Route Type slider towards Shortest distance to give high priority to the shortest
distance when calculating a route.
Note: Selecting Shortest distance over Faster time can cause much longer journey time.
change the preference for
motorways
move the Preference for Motorways slider towards Less often to use roads other than
motorways where possible when calculating a route.
Note: This option may not completely remove Motorways from a route.
move the Preference for Motorways slider towards More often to use motorways where
possible when calculating a route.
Your preferences are automatically saved.
69
Road Types 2/5
Complete the following:
If you want to ... Then...
avoid toll roads
receive a warning if your route
includes toll roads
select the Toll roads check box in the Avoid column.
select the Toll roads check box in the Warn column. The warning will display at the start
of every trip containing a toll road.
avoid unsurfaced roads
receive a warning if your route
includes unsurfaced roads
select the Unsurfaced roads check box in the Avoid column.
select the Unsurfaced roads check box in the Warn column. The warning will display at
the start of every trip containing unsurfaced roads.
avoid ferry routes
receive a warning if your route
includes ferry routes
select the Ferry routes check box in the Avoid column.
Note: Avoiding ferry routes may prevent you from navigating between certain countries,
even when a bridge or tunnel exists.
select the Ferry routes check box in the Warn column. The warning will display at the start
of every trip containing ferry routes.
Your preferences are automatically saved.
70
Road Types 3/5
This special zone is the restricted area where you can set to avoid when calculating a route. For example, in
Greece, you are not allowed to drive in the pollution zone when the air pollution is reached to certain level.
Note: The actual use of this special zone varies from country to country.
Complete the following:
If you want to ... Then...
avoid special zone
receive a warning if your route includes a
special zone
select the Special zone check box in the Avoid column.
select the Special zone in the Warn column. The warning will display at the start
of every trip containing special zone.
Your preferences are automatically saved.
71
Driver Alerts 4/5
Complete the following:
If you want to ... Then...
enable a visual warning if the Main Menu
screen is accessed in a moving vehicle
select the Warn me not to operate my Navman while driving check box.
enable a warning chime when travelling
at or above a designated speed
select the Enable speed warning….. check box.
select your preferred speed select your preferred speed from the Speed box.
Your preferences are automatically saved.
72
Data Recording 5/5
Complete the following:
If you want to ... Then...
record a GPS log of your trips select the Enable GPS data logging check box.
record mileage select the Enable trip recording check box.
Note: This option is not available on all models.
73
Map Display
You can change the look and behaviour of the Map screens by customizing the Map Display preferences.
Map Display 1/3
Complete the following:
If you want to ... Then...
change the map colour scheme select your preferred scheme from the Map Colour Scheme box.
set the screen contrast to automatically
adjust
select the Auto day/night option.
improve screen contrast in light or dark
conditions
select either the Day or the Night option to manually adjust the contrast.
Your preferences are automatically saved.
74
Map Display 2/3
Complete the following:
If you want to ... Then...
enable automatic zooming during
navigation
select the Auto-zoom on main map screens check box. If selected, the 3D
Map screen will automatically zoom in or out, depending on your speed, to
allow optimal viewing of your route.
display North at the top of the 2D Map
screen
select the Keep North at top of 2D Map screen check box.
Note: If not selected, the direction you are travelling in will display at the top
of the 2D Map screen.
display “no entry” icons on “no entry” roads
on the 2D Map and 3D Map screens
select the Show no-entry road signs check box.
Your preferences are automatically saved.
75
Select Map 3/3
Complete the following:
If you want to ... Then...
use maps from a different continent select a different continent from the maps you are currently using. When selected,
the maps for the new continent will load and the 3D Map screen will display.
Your preferences are automatically saved.
76
Map POIs
Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI
categories on the map screens, or only display the icons from selected categories.
For example, you may only be interested in entertainment venues and want to disable other categories such as
schools.
Complete the following:
If you want to ... Then...
display all POI icons (ie, icons from all categories) Tap Turn All On.
display no POI icons Tap Turn All Off.
select a specific POI category icon for display on
the map screens
select the required POI category checkbox;
repeat until all required categories are selected.
Your preferences are automatically saved.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman F37M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman F37M in the language / languages: English as an attachment in your email.

The manual is 16,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman F37M

Navman F37M User Manual - German - 99 pages

Navman F37M User Manual - Dutch - 100 pages

Navman F37M User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info