512539

Navman Depth 100 Manual

9
Zoom out
Zoom in
Previous page
1/10
Next page
10 NAVMAN D100 User Manual
Troubleshooting Chart
No display:
Check DC power connections and DC polarity with voltmeter. Voltage
must be between 10.7 and 16.6 volts.
No depth reading (--) at all depths:
1. Check transducer for growth or multiple coats of paint.
2. Check the transducer cable for cuts and sharp bends.
3. Substitute the transducer with a known good transducer hold it over the
side of the boat into the water and see if instrument functions. This
isolates cause of problem (transducer or instrument).
Erratic readings (while moored):
Check transducer for growth or multiple coats of paint.
Erratic readings (while underway):
Cavitation (air) under the face of the transducer. Review installation
and reinstall if necessary.
When power is applied, display right-hand digit counts up or down:
See previous section on Depth Simulation.
Erratic readings when engine is running:
1. Reroute power and transducer cables away from ignition wires and
battery cables.
2. Add feed-through filter capacitor on the positive terminal of the ignition
coil.
3. Add alternator whine filter to alternator.
4. Replace spark plug wire with resistive type.
Simulation Mode
At power up, if all the segments display for 5 seconds then the instrument
is in simulation mode.
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Depth 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Depth 100 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info