13386
19
Zoom out
Zoom in
Previous page
1/90
Next page
8120 Installation and Operation Manual19
3-1-2 Going to a waypoint or to a point on the
chart
A waypoint is a position that you can set on
the Instrument chart, for example a fishing
spot or a point on a route (see section 5).
Going to a waypoint from the chart
window
1 Go to the chart window.
2 Move the cursor to the waypoint: either
use the cursor keys or use Find (see
section 3-2-5).
3 Press
GOTO
AUTO
Going to a waypoint from the waypoints
window
1 Go to the waypoints window.
2 Press or
to highlight the waypoint to
go to.
3 Press
MENU
and select Goto.
Going to a point on the chart
1 Switch to a chart window.
2 Move the cursor to the destination point:
either use the cursor keys or use Find (see
section 3-2-5).
3 Press
MENU
and select Goto cursor.
To create waypoints before creating the
route, see section 5-2-1.
To create a route, see section 6-2-1.
Starting a route from the chart window:
1 Go to the chart window.
2 Press
MENU
and select Start Route
3 Press
or
to highlight the route to
follow. Press
ENTER
.
4 The Instrument asks for the direction to
traverse the route.
Select Forward (the order the route was
created) or Reverse.
5 The Instrument displays the chart with the
route marked and starts navigating from
the start of the route.
Starting a route from the routes window:
1 Go to the routes window.
2 Then follow step 3 as in starting a route
from the chart window above.
Navigating
The Instrument navigates to each waypoint
on the route in turn as described in section
3-1-1.
The Instrument stops navigating to the
waypoint at the end of the current leg and
starts the next leg of the route:
1 When the boat comes within 0.025 nm of
the waypoint
2 Or when the boat passes the waypoint
3 Or if you skip the waypoint.
Skipping a waypoint
To skip a waypoint, go to a chart window,
press
MENU
and select Skip. The Instrument
starts navigating straight towards the next
waypoint on the route.
CAUTION
!
!
CAUTION
DANGER
WARNING
Make sure the course does not pass over
land or dangerous waters.
Navigating
The Instrument navigates to the point as
described in section 3-1-1.
Cancelling navigating
Go to a Chart window, press
MENU
and select
Cancel goto.
Tip: Before starting, create waypoints at
points of interest. Create a waypoint at the
start of the trip for you to navigate back to
(see section 5-2-1).
3-1-3 Following a route
Preparing
A route is a list of waypoints that the boat can
follow (see section 6).
Cancelling a route
When the boat has reached the final
waypoint, or to stop the boat following the
route at any time, cancel the route. Go to a
chart window, press
MENU
and select Cancel
route.
CAUTION
!
!
CAUTION
DANGER
WARNING
Skipping a waypoint with the autopilot on
might result in a sudden course change.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman 8120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman 8120 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman 8120

Navman 8120 User Manual - German - 98 pages

Navman 8120 User Manual - Dutch - 100 pages

Navman 8120 User Manual - French - 102 pages

Navman 8120 User Manual - Italian - 98 pages

Navman 8120 User Manual - Portuguese - 98 pages

Navman 8120 User Manual - Swedish - 93 pages

Navman 8120 User Manual - Spanish - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info