663846
86
Zoom out
Zoom in
Previous page
1/116
Next page
NAVMAN 8120/8084 Installation and Operation Manual86
Press
MENU
twice, then select Alarms:
19-10 Setup > Alarms
For all alarms select to turn the alarm on
or select
to turn the alarm off. For most
alarms there is a trigger value. The alarm will
sound each time the alarm value equals the
trigger value.
For example, the Danger alarm will sound if
the boat comes closer to a danger waypoint
than the trigger value and the Anchor
alarm will sound if the boat moves by more
than the trigger value.
You can display the alarm status in the data
header (see section 2-7-3). The alarm status
shows the symbol for each alarm that is on.
The symbol is normally black and turns red if
the alarm triggers.
Symbol Alarm Beeper Alarm sounds when it is on and the:
Arrival radius Boat is closer to the destination or to a waypoint than the alarm trigger
value
Anchor alarm Boat moves by more than the alarm trigger value
XTE Boat moves off course by more than the CDI scale (see section 5)
Danger Boat comes closer to a danger waypoint than the alarm trigger value
Too shallow
1
/
5
sec Depth is less than the alarm trigger value
Too deep
1
/
2
sec Depth is greater than the alarm trigger value
Fish 1 short beep Echo matches the profi le of a fi sh
Temperature
1
/
2
sec Temperature equals the alarm trigger value
Temperature
rate
1
/
2
sec Rate of change of temperature equals the alarm trigger value
Low battery
1
/
2
sec Battery voltage is less than the alarm trigger value
Low fuel
1
/
2
sec Low fuel remaining equals the alarm trigger value; on a multitank boat
you can set separate alarms for each tank (see section 13-4)
Loss of DGPS fi x Instrument can not receive the DGPS signal (beacon, WAAS or EGNOS)
Loss of GPS fi x Instrument can not receive the GPS signal (this alarm is always on)
Loss of AIS
receiver
communication
8120/8084 is no longer receiving communication from the AIS receiver
(Alarm is on when AIS is enabled)
Dangerous
vessel
The TCPA/CPA of another vessel is less than the trigger values
(see section 13)
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman 8084 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman 8084 in the language / languages: English as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info