663846

Navman 8084 Manual

25
Zoom out
Zoom in
Previous page
1/116
Next page
NAVMAN 8120/8084 Installation and Operation Manual 25
ii Select other items or press
ESC
to
return to the chart.
To see stored information about nearby
symbols press
MENU
and select Chart info.
Then follow step 3 above.
3-2-5 Finding a chart symbol
To find and display a chart symbol:
1 Press
MENU
and select Find.
2 Select the type of symbol: Waypoints,
Routes, Ports by name, Ports & services, or
Tide stations.
3 For Ports & services: select the type of
service to find.
For Ports by name: press
, , or to
enter a name or letters contained in the
port name, then press
ENTER
.
4 A list of items is displayed. If there are
more items than will fit on the window,
press
or to page up and down.
For Ports by name: to search for a different
port name, press
ESC
. Change the name,
then press
ENTER
.
5 Select the item and press
ENTER
. The chart
window changes to show the item in the
middle of the window.
To see stored information about the item,
press
ENTER
(see section 3-2-4).
3-2-6 Perspective view
Perspective view shows the chart from an
angle instead of from straight above. To turn
perspective view on or off, press
MENU
and set
Perspective to
or .
3-2-7 Turn the radar overlay on or off
If you have a radar installed, you can overlay
the radar screen on your chart screen. This is
extremely useful because it can help you to:
• interpret the radar image by matching the
radar targets with charted objects
• quickly identify objects that are not on the
chart, such as other boats
The radar overlay is also very useful in
conditions of reduced visibility, at night, or in
busy or hazardous waters.
The range, rotation, mode, and centre
position of the radar are all adjusted
automatically to match your chart.
To turn the radar overlay on or off:
From the chart window, press
MENU
and set
Radar Overlay option to
or .
An extra menu item will them be displayed to
control the radar and overlay.
3-3 Distance and bearing calculator
The distance and bearing calculator can plot
a course of one or several legs and show
the bearing and length of each leg, as well
as the total distance along the course. The
completed course can be converted into a
route.
To use the distance and bearing calculator:
1 Select the Chart window. Press
MENU
and
select Distance.
2 Move the cursor to the start of the first
leg. It does not matter if this point is a
waypoint or not. Press
ENTER
.
3 To add a leg to the course, move the
cursor to the end of the leg. It does not
matter if this point is a waypoint or not.
The window shows the bearing and length
of the leg, as well as the total distance
along the course. Press
ENTER
.
4 To remove the last leg from the course,
press
MENU
and select Remove.
5 Repeat the above two steps to enter the
whole course.
6 To save the new course as a route,
press
MENU
and select Save. This also
saves any new points on the course as
new waypoints, with default names. If
necessary, edit the route later (see section
6-2-2) and edit any new waypoints later
(see section 6-2-3).
7 Finally, press
ESC
to return to the chart
window.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman 8084 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman 8084 in the language / languages: English as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info