663846
8
Zoom out
Zoom in
Previous page
1/116
Next page
NAVMAN 8120/8084 Installation and Operation Manual8
1-2 Cleaning and maintenance
The Instrument screen is covered by a
proprietary anti-reflection coating. To avoid
damage, clean the screen only with a damp
cloth and mild detergent when dirty or
covered in sea salt. Avoid abrasive cleaners,
petrol or other solvents. If a plug-in card gets
dirty or wet, clean it with a damp cloth or
mild detergent.
Cover or remove a transom-mounted
transducer when repainting the hull. If
painting over a through hull transducer with
antifouling paint, use only one coat of paint.
Remove the previous coat of antifouling paint
by sanding it lightly.
To optimize performance, avoid walking on
or jamming cables and connectors. Keep the
transducer free of weed, paint and debris.
Do not use a high pressure water blast on a
speed sensor paddlewheel as it may damage
the bearings.
Push the dust cover over the display when
the Instrument is turned off.
The NAVMAN 8120/8084 is a rugged, highly
integrated marine chartplotter and fishfinder.
It is easy to use and has a high resolution
color display. Complex functions can be
performed with only a few key presses, taking
the hard work out of boating.
The available functions depend on the
optional sensors and instruments that are
installed:
The Video window requires the 8120/8084
to receive video from a compatible source,
such as a camera.
Fuel functions require one or more
petrol/gasoline or diesel fuel sensors to be
installed.
SmartCraft engine functions require a
SmartCraft system to be installed. For
information on using SmartCraft, see
the SmartCraft Gateway Installation and
Operation Manual.
1-1 Overview
DSC/Buddy track functions require an
appropriate NAVMAN DSC VHF radio to be
installed.
The 8120/8084 can send data to other
instruments, such as an autopilot, and
receive data from other instruments.
Radar functions require an optional
NAVMAN radar system to be installed.
Three radar systems are available; 2 kW, 4
kW, or 6 kW.
AIS functions require an optional AIS
receiver to be installed.
For information on installation options, see
section 20.
This manual describes how to install and
operate the 8120/8084. Special terms
are explained in Appendix C. For more
information on this instrument and other
NAVMAN products, go to our website,
www.navman.com.
Radar Overview of the radar 18 Radar
The radar window explained 18-1 Radar
Change the radar operation mode 18-2 Radar
Change the radar rotation or motion mode 18-6, 18-7 Radar
Optimize the quality of the radar window 18-9 Radar
Find range and bearing with VRM/EBL 18-10 Radar
Set up the radar guard zones 18-12 Radar
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman 8084 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman 8084 in the language / languages: English as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info