737243
37
Zoom out
Zoom in
Previous page
1/54
Next page
37
Push the OK button to set the Telemetry Heart Rate Receiver to active.
11. The Console will go to the Power-Up Mode screen with the user selected.
Reset a User Profile
1. From the Power-Up Mode screen, push the User button to select one of the User Profiles.
2. Push the OK button to select the User Profile.
3. The Console display shows the GOAL TRACK prompt. Push the Decrease () button to change the prompt.
Note: To exit the User Profile options, push the PAUSE/STOP button and the console will go back to the Power-Up Mode
screen.
4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Profile
option.
5. The Console will now confirm the request to reset the User profile (the default selection is ‘RESET - NO’). Push the
Increase() or Decrease() buttons to adjust the selection.
6. Push OK to make your selection.
7. The Console will go to the Power-Up Mode screen.
Changing Incline Levels
Push the Incline Level Increase() or Decrease() buttons to change the incline angle of
the Deck at any time with the Safety Key installed. To rapidly change the incline level push
the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will adjust
to the selected incline level.
Note: After a Pre-Set Incline Button is pushed, the Incline Enter Button must be
pushed within 12 seconds.
Be sure the area below the machine is clear before lowering the Deck. Fully
lower the Deck after each workout.
Exercise on this machine requires coordination and balance. Be sure to
anticipate that changes in belt speed and incline angle of deck can occur
during workouts, and be attentive in order to avoid loss of balance and possible injury.
Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the
user and the maximum height of the fully inclined Deck.
Changing Speed Levels
Push the Speed Level Increase() or Decrease() buttons to change the Belt Speed at any time in a workout program. To
rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking Belt
will adjust to the desired speed.
Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.
Profile Programs
These programs feature different incline angles of the deck and belt speeds based on the maximum and minimum speed
supplied by the user. The user can also manually adjust the incline and speed values at any time during a workout. The Profile
Programs are organized into Categories (Quick Goal, Heart Health, Weight Control, Interval, Train, and Custom). Each Profile
Program has 16 segments allowing for a variety of workouts.
INCLINE SPEED
确定
PROGRAMS
程式
26 Performance Workouts
26 个锻炼程式
USER
用户
4 Unique Profiles
4 个独立用户档案
COMPARE
比较
Previous Performance
上次成绩
12
10
8
6
5
4
2
19.3
16.0
12.8
9.6
8.0
6.4
3.2
15
13
10
8
5
2
0
INCLINE 0-15%
坡度 0-15%
SPEED 速度
km/h
公里每小时
mph
英里每小时
ENTER
输入
PAUSE/STOP
暂停/停止
START
开始
ENTER
输入
HEART RATE ZONES
心率区间
Max
最高
100%
Anaer
obic 无氧锻炼
80-90%
Aer
obic 有氧锻炼
70-80%
Fat Burn 燃烧脂肪
50-70%
W
arm Up 热身锻炼
50%
坡度
速度
Pre-Set Incline
Buttons
Incline
Enter
Button
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nautilus T686 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nautilus T686 in the language / languages: English as an attachment in your email.

The manual is 19,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info