691187
4
Zoom out
Zoom in
Previous page
1/56
Next page
4
Before using this equipment, obey the following warnings:
Read and understand the complete Manual. Keep the Manual for future reference.
Read and understand all warnings on this machine. If at any time the Warning labels become loose,
unreadable or dislodged, contact your local distributor for replacement labels.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the
power cord from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the
machine. Place the power cord in a secure location.
Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous
to children.
Not intended for use by anyone under 14 years of age.
Consult a physician before you start an e[ercise program. Stop e[ercising if you feel pain or tightness in your
chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values
calculated or measured by the machine’s computer for reference purposes only.
Before each use, e[amine this machine for damage to power cord, power receptacle, loose parts or signs of wear. Do
not use if found in this condition. Contact your local distributor for repair information.
• Ma[imum user weight limit: 156. kg ( 350 lbs. ). Do not use if you are over this weight.
Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put ¿ngers or other objects into
moving parts of the e[ercise equipment.
Always wear rubber soled athletic shoes when you use this machine. Do not use the machine with bare feet or only
wearing socks.
Set up and operate this machine on a solid, level, horizontal surface.
Use caution when you step on and off the machine. Use the supplied foot support platforms for stability before walking
on the moving belt.
Disconnect all power before servicing this machine.
Do not operate this machine outdoors or in moist or wet locations.
To prevent injury, stand on the Foot Platforms before you start the machine or end a workout. Do not dismount the
machine by standing on the moving Walking Belts and e[iting off the rear of the unit (or machine).
Keep at least 0.6 m ( 24” ) on each side of the machine and 2 m ( 79” ) behind the machine clear. This is the
recommended safe distance for access and passage around and emergency dismounts from the machine. Keep third
parties out of this space when machine is in use.
Do not over e[ert yourself during e[ercise. Operate the machine in the manner described in this manual.
Perform all regular and periodic maintenance procedures recommended in the Owner’s Manual.
Read, understand, and test the Emergency Stop Procedure before use
Keep the walking belt clean and dry.
Do not drop or put objects into any opening of the machine.
Do not stand on machine motor cover or front trim cover.
Keep power cord away from heat source and hot surfaces.
This machine must be connected to an appropriate, dedicated electrical circuit. Nothing else must be connected to the
circuit.
Always connect the power cord to a circuit capable of handling at least 10 amperes with no other loads applied.
Connect this machine to a correctly earthed outlet; consult a licensed electrician for assistance.
Do not let liquids touch the electronic controller. If it does, the controller must be inspected and tested for safety by an
approved technician before it can be used again.
Do not remove the machine motor cover or the rear roller cover, dangerous voltages and moving parts are present.
The components are serviceable only by approved service personnel.
The electrical wiring for the residence in which the machine will be used must obey the applicable local and provincial
requirements.
4


Need help? Post your question in this forum.

Forumrules
1

Forum

nautilus-t628

Reset search

  • The belt does not start. When starting on manual and the speed setting is on 2 when it is counting down from 3 sec.When it comes down to 0 sec the speed setting goes to 0 and nothing happens.

    Power is ok
    Safety and thermal switch are ok
    Submitted on 17-10-2020 at 13:24

    Reply Report abuse
    • Did you work out how to fix this? Ours has done the same today. Answered on 30-7-2022 at 01:08

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nautilus T628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nautilus T628 in the language / languages: English as an attachment in your email.

The manual is 8,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nautilus T628

Nautilus T628 User Manual - German - 56 pages

Nautilus T628 User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info