Manual Nautilus T626 after 2017 (page 31 of 56) (English)

737241

Zoom out

Zoom in

1/56

The heart rate transmitter is attached to a chest strap to keep your hands free during your

workout. To put on your chest strap:

1. Attach the transmitter to the elastic chest strap.

2. Secure the strap around your chest with the curve of the transmitter oriented upward,

just below the chest muscles.

3. Lift the transmitter off your chest and moisten the two Grooved Electrode Areas on the

back.

4. Checkthatthewetelectrodeareasarermlyagainstyourskin.

The transmitter will send your heart rate to the machine’s receiver and display your

estimated Beats Per Minute (BPM).

Always remove the transmitter before you clean the chest strap. Clean the chest strap regularly with mild soap and water,

and thoroughly dry it. Residual sweat and moisture may keep the transmitter active and drain the battery in the transmitter.

Dry and wipe clean the transmitter after each use.

Note: Do not use abrasives or chemicals such as steel wool or alcohol when you clean the chest strap, as they can

damage the electrodes permanently.

IftheConsoledoesnotdisplayaheartratevalue,thetransmittermaybeatfault.Checkthatthetexturedcontactareas

on the chest strap are making contact with your skin. You may need to lightly wet the contact areas. Check that the curve

of the transmitter is oriented upward. If no signal appears or you need further assistance, call your local distributor.

Before discarding a chest strap, remove the battery. Dispose of in accordance with local regulations and/or

at approved recycling centers.

Remote Heart Rate Monitor

MonitoringyourHeartRateisoneofthebestprocedurestocontroltheintensityofyourexercise.ContactHeartRate

(CHR) sensors are installed to send your heart rate signals to the Console. The Console can also read telemetry HR sig-

nals from a Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.

Note: The heart rate chest strap must be an uncoded heart rate strap from Polar Electro or an uncoded POLAR

compatible model. (Coded POLAR

heart rate straps such as POLAR

OwnCode

chest straps will not work with this

equipment.)

If you have a pacemaker or other implanted electronic device, consult your doctor before using a wireless

chest strap or other telemetric heart rate monitor.

Contact Heart Rate Sensors

Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel

parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the

topandthebottomofthesensors.Holdrm,butnottootightorloose.Bothhandsmustmakecontactwiththesensorsfor

the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.

Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now

validatetheheartrate.Manyfactorsinuencetheabilityofthesensorstodetectyourheartratesignal:

• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere

with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.

• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.

• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be detected by the sensors.

• Theproximityofotherelectronicmachinescangenerateinterference.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nautilus T626 after 2017 in the language / languages: English as an attachment in your email.

The manual is 19,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nautilus T626 after 2017

Nautilus T626 after 2017 User Manual - Dutch - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nautilus T626 after 2017 Manual

Product: