671391
37
Zoom out
Zoom in
Previous page
1/56
Next page
37
the value. The default is “ON.
Push the OK button to set the Telemetry Heart Rate Receiver to active.
11. The Console will go to the Power-Up Mode screen with the user selected.
Reset a User Profile
1. From the Power-Up Mode screen, push theUserbuttontoselectoneoftheUserProles.
2. Push the OK button to select the User Profile.
3. The Console display shows the GOAL TRACK prompt. Push the Decrease () button to change the prompt.
Note:ToexittheUserProfileoptions,pushthePAUSE/STOPbuttonandtheconsolewillgobacktothePower-Up
Mode screen.
4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User
Proleoption.
5. TheConsolewillnowconfirmtherequesttoresettheUserprofile(thedefaultselectionis‘RESET-NO’).Pushthe
Increase()orDecrease()buttonstoadjusttheselection.
6. Push OK to make your selection.
7. The Console will go to the Power-Up Mode screen.
Changing Incline Levels
Push the Incline Level Increase()orDecrease()buttonstochangetheinclineangleoftheDeckatanytimewiththe
Safety Key installed. To rapidly change the incline level push the desired Pre-Set Incline Button, and then the Incline Enter
Button. The Deck will adjust to the selected incline level.
Pre-Set Incline
Buttons
Incline Enter Button
Note: After a Pre-Set Incline Button is pushed, the Incline Enter
Button must be pushed within 12 seconds.
Be sure the area below the machine is clear before
lowering the Deck. Fully lower the Deck after each
workout.
Exercise on this machine requires coordination and
balance. Be sure to anticipate that changes in belt
speed and incline angle of deck can occur during
workouts, and be attentive in order to avoid loss of
balance and possible injury.
Be sure that the workout space you are utilizing has adequate
height clearance, taking into consideration the height of the user
andthemaximumheightofthefullyinclinedDeck.
Changing Speed Levels
Push the Speed Level Increase()orDecrease()buttonsto
change the Belt Speed at any time in a workout program. To
rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking
Belt will adjust to the desired speed.
Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nautilus T616 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nautilus T616 in the language / languages: English as an attachment in your email.

The manual is 19,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nautilus T616

Nautilus T616 User Manual - English - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info