707126
176
Zoom out
Zoom in
Previous page
1/212
Next page
P800: This three-band EQ model references more recent DJ mixers by a Japanese manu-
facturer.
Filter Type: Selects the Filter type to be controlled using the internal Mixer.
Ladder: The Ladder filter concept is commonly associated with classic synthesizers. It of-
fers a steep response and a lot of resonance.
Xone: This filter is modeled after a line of DJ mixers by a British manufacturer. It has a
more mellow slope and less resonance.
Z: This is the same filter model as found in the new TRAKTOR KONTROL Z2 DJ-mixer. It is
a steep filter, but it does not have as much resonance as the Ladder model.
Mixer FX
Mixer FX Slot 1, 2, 3, 4: Preselect one of seven available Mixer FX for each of the Mixer FX
slots: Reverb, Dual Delay, Noise, Time Gater, Flanger, Shepard, and Barber Pole.
Crossfader
Auto Crossfade Time: Adjusts the amount of time for the auto crossfade function to crossfade
between tracks.
Smooth/Sharp: Adjusts the crossfader curve from Smooth to Sharp.
Mixer Layout
EQ + Fader: Shows or hides the EQ controls and the Channel faders from the internal Mixer.
Filter + Key + Gain + Cue + Balance: Shows or hides the Filter, Key, Gain, Cue, and Balance
controls from the internal Mixer.
Crossfader: Shows or hides the crossfader from the internal Mixer.
Internal Mixing Mode
The options in this section let you configure the Internal Mixing Mode.
Enable Autogain: When you enable this option, TRAKTOR adjusts the gain for the incoming
audio signals automatically.
Enable Limiter: Enables the Limiter to prevent clipping of the outgoing audio signal. You can
also access this option directly from the Master Control panel.
Limiter Type: Selects the Limiter type Classic or Transparent from the drop-down menu.
Classic allows a slight digital distortion of the signal.
Transparent compresses the signal in a less audible way.
Headroom: Here you can define the size of the headroom by selecting one of the values from
the drop-down menu. Select from None, -3dB, -6dB, -9dB, or -12dB. When None is selected,
there is no additional headroom before the audio signal starts clipping. When a specific value is
selected, there is additional headroom in the relevant size before the signal starts clipping.
Apply Headroom to Channel Meters: When this setting is enabled the current headroom set-
ting is visually reflected by the Channel Meter LEDs in the Mixer channels.
Preferences
168
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Traktor Pro 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Traktor Pro 3 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info