707128

Native Traktor Kontrol S4 MK3 Manual

90
Zoom out
Zoom in
Previous page
1/92
Next page
2. Click the Deck letter of the Deck for which you want to enable the Scratch function.
The context menu opens.
3. Select Track Deck.
The Deck switches to Track Deck.
4. Click the Deck letter again to open the context menu.
5. Select Scratch Control.
The Scratch function is enabled for the Track Deck. The CUE and CUP buttons of the Trans-
port Controls are replaced by the Absolute mode button and Relative mode button.
6. Repeat the aforementioned steps if you have another device for Scratch control connected.
Using Timecode Media
To control the Decks you need to use the timecode media corresponding to the devices you use:
1. Load a track into the Deck.
2. Put on the timecode vinyl(s) on your turntable(s) or insert the CD(s) into your CD player(s).
3. Start playback on the device(s).
TRAKTOR now calibrates the incoming timecode signal.
4. Click either the Absolute mode button or the Relative mode button in the Transport Controls.
The track playback in the Deck is now controlled by the timecode signal coming from the ex-
ternal device.
Displaying the Timecode Scopes in the Decks
To additionally monitor the timecode signal quality, you can display the timecode signal scopes on
the individual Decks in TRAKTOR:
1. Open the Preferences in TRAKTOR.
2. Select the Decks Layout page.
3. In the Platter / Scope section, select Scope from the individual drop-down menus.
The timecode scopes are now visible in the Decks.
9.5. Using the S4 as a Standalone DJ Mixer
You can operate the S4 in Standalone mode to mix music from your connected turntables or CD
players without using your computer. In Standalone mode the Decks and the FX Units have no
function. Only the Mixer operates as a conventional DJ mixer. This means the Mixer FX are not
available, but you can use the Filter on each Mixer channel. In this section you will learn how to
enable Standalone mode and how you configure the mixer channels according to your connected
audio devices.
Prerequisites
We assume that you already have connected your external audio devices to the S4. If this is not
the case, follow the instructions in these sections before you proceed:
• Integrating Turntable
• Integrating CD Players
Integrating External Devices
87
… 90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Traktor Kontrol S4 MK3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Traktor Kontrol S4 MK3 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Native Traktor Kontrol S4 MK3

Native Traktor Kontrol S4 MK3 User Manual - German - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info