707141
46
Zoom out
Zoom in
Previous page
1/70
Next page
By default, the audio sent to the MAIN output will also be sent to the headphone output as
well. This makes it much easier to use TA2 because you can leave headphones and com-
puter speakers connected simultaneously and never have to make any changes to the oper-
ating system's audio settings to use either of them. This is because the Cue Mix encoder is
set so that the Headphone output monitors the Main signal by default. You can therefore
adjust the volume of the computer speakers using the volume control on the speakers
themselves. Then, adjust the headphone volume independently with the Headphones Vol-
ume Encoder on the TA2.
6.1 Driver Software Installation on Windows
This section describes the process of installing the TRAKTOR AUDIO 2 hardware driver soft-
ware on Windows in case you do not intend to install the TRAKTOR software. The TRAKTOR
AUDIO 2 does not require a dedicated driver under Mac OS X. If you intend to use your TRAK-
TOR AUDIO 2 with a Mac computer skip to section 6.2, Connecting TRAKTOR AUDIO 2 to
Your Computer. For Installing the TRAKTOR AUDIO 2 driver software on Windows continue
with this section first. Before you proceed, here are some points to be aware of:
Make sure you have downloaded the driver software installation program to your computer by
following the instructions on the registration page:
www.native-instruments.com/go-ta2
Alternatively, you can get it from the following webpage: TRAKTOR AUDIO 2
Please carefully review the installer screens and the suggested installation paths in order to
avoid that any unwanted folders are created on your hard disk.
Moving any folders related to Native Instruments software after installation is not recom-
mended. Future software updates rely on the directory locations set during initial installa-
tion.
In order for the TRAKTOR AUDIO 2 to work properly with your computer, the following two pro-
grams are automatically installed on your system during the driver software installation proc-
ess:
The TRAKTOR AUDIO 2 driver. This handles the communication between the audio interface
and your computer.
The Control Panel software: In Windows, the Control Panel software allows you to adjust
performance settings, preamp settings, and to perform diagnostics.
Using TRAKTOR AUDIO 2 as Your Computer's Default Audio Output Device
Driver Software Installation on Windows
TRAKTOR AUDIO 2 - Manual - 46
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Traktor Audio 2 MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Traktor Audio 2 MK2 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Native Traktor Audio 2 MK2

Native Traktor Audio 2 MK2 User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info