707122
24
Zoom out
Zoom in
Previous page
1/30
Next page
Modulator overview showing Mod 1
(1) Waveform Select: Selects the source modulation to be used for Modulator 1 or 2. Multiple
shapes can be selected to create more complex waveforms. If no waveforms are selected, the
Modulator will be disabled.
(2) Sync: Selects fixed speed rates for Modulator 1 or 2, adjusted to the BPM of REAKTOR or
your host.
(3) Modulator Mode: Select the mode for Modulator 1 or 2:
MONO: One free running LFO, applied to all voices.
POLY: Individual free running LFOs, one for each voice.
TRIG: Individual LFOs which will be triggered on each new note.
MONOTRIG: One LFO which is triggered on the first note pressed down. The LFO will not trig-
ger again until all keys are released.
(4) Speed: Controls the modulation speed of Modulator 1 or 2. When Sync (2) is on, tempo match-
ed rates can be selected.
(5) Trigger Phase: For TRIG and MONOTRIG modes, this knob will set the starting phase that the
LFO is triggered to.
5.7. Modulation Routing
In simple terms, modulation routing allows a control signal from one module to be used to influ-
ence the value of a parameter in another module. SUPER 8 has a flexible routing system that can
be used to quickly and easily setup a modulation route. By clicking on the Destination bar and then
selecting a control in the synthesizer, the modulation sources for that control are revealed below.
The modulation Source drop-down menu provides a plethora of sources which can be applied to
the control, including the Modulation Wheel and the Touchstrip.
The modulation amount is controlled using the Modulation Depth knobs. Further modulation and
the modulation signal itself can be modulated using the Sidechain signal. This is useful for adjust-
ing the depth of continuously modulated controls (ie: an LFO) with a static control (ie: the Mod-
wheel).
Overview of SUPER 8
22
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Super 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Super 8 in the language / languages: English as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info