Manual Native Skanner XT (page 50 of 59) (English)

707123

Zoom out

Zoom in

1/59

If KEY SYNC is off the phase of the LFO will be synced to the song position and the PHASE

parameter adjusts the phase offset to the song position.

[5] SHAPE: Use the SHAPE knob to crossfade between different waveforms of the LFO. The

values below produce the following results:

▪ 0 - Sine (SHAPE knob in the far left position)

▪ 1 - Triangle (SHAPE knob in the upper left position)

▪ 2 - Pulse (SHAPE knob in the upper right position)

▪ 3 - Random (SHAPE knob in the far right position)

[6] SYM: The symmetry of the two ramps of the triangle waveform can be set here. Positive

values increase the speed of the rising ramp.

▪ +1 : falling sawtooth

▪ 0 : symmetric triangle

▪ -1 : rising sawtooth.

[7] PHASE: When KEY SYNC is on, this knob determines the phase of the LFO at note-on.

▪ -1 : zero crossing of the falling ramp

▪ -0.5 : lower peak

▪ 0 : zero crossing of the rising ramp

▪ +0.5 : upper peak

▪ +1 : zero crossing of the falling ramp.

[8] FADE: Fade-in time (in seconds). It controls the ramp-up of the LFO amplitude, which is

triggered by each note-on.

5.8

Macro Controls Section

SKANNER XT has four modulation Macro Controls. These can be used with remote controllers,

in a keyboard setting roughly corresponding to a volume or expression pedal, and the modula-

tion wheel. The first two macros (SOURCE and VARIATION) have three assignable targets and

the second two macros (FILTER and SPACE) have two assignable targets. All controls can be

Overview of SKANNER XT Ensemble

Macro Controls Section

SKANNER XT - Manual - 50

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Native Skanner XT in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Native Skanner XT Manual

Product: