707119

Native Massive X Manual

120
Zoom out
Zoom in
Previous page
1/133
Next page
(10) Release (R): Defines the amount of time it will take for the envelope to fall from the set Sus-
tain level and fade to zero.
(11) Env Level: Defines the overall level of the envelope.
(12) Velocity: Controls the influence of the incoming MIDI note’s velocity on the overall amplitude
of the envelope. When turned fully left, the envelope amplitude is not influenced by the incoming
note’s velocity. When the fader is turned fully right, the overall envelope amplitude is directly pro-
portional to the incoming note’s velocity. The Velocity button changes the slope of the Velocity
control from linear to logarithmic, when activated.
(13) Trigger: Selects one of four settings (Gate, OneShot, LoopGate, Loop), that determine the
envelope's response to incoming MIDI notes.
• When Gate is selected, the envelope starts and is read out until its end. If the key is released
before the Sustain stage of the envelope, it will immediately jump to the Release stage.
• With OneShot selected, the envelope is read to end, even if the key is released before the
Sustain stage.
• LoopGate creates a loop between the Attack and Decay stages.
• Loop creates a loop from the entirety of the envelope, including the Release stage.
(14) Reset: When active, the envelope will restart each time a note is triggered.
(15) Note Off: When active, the envelope is triggered with the note-off stage, for example when a
key is released.
(16) Mono: When activated, all incoming notes receive the same envelope shape, regardless of
pitch.
(17) Display: Provides a visual representation of the envelope shape, based on how the knobs
and menus are set. Move the controls described above to see how each parameter influences the
shape of the envelope.
19.4. Exciter Envelope
The Exciter envelope is particularly fast envelope that has been specifically designed to trigger the
Comb filter, producing a resonator in physical modelling. It also effective for creating percussive
sounds, with its quick attack and short release times.
The Exciter is unlike a standard ADSR based, multi-stage envelope generator. It is an Attack-Re-
lease envelope with short times, functioning in a single cycle, with a defined centre point and Hold
stage that maintains the peak level from Attack to Release stages.
To use this envelope as an exciter for the Comb filter, it must be assigned to one of the Modulation
Sources via the Routing page, routed to the Comb filter and then the filter routed to the output.
This enables you to set the Comb filter into oscillation and create tones from the Feedback. A low
Ratio setting produces the short envelope burst needed to create sound from the filter. For more
information, see Comb.
Modulators
116 Manual
… 120 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Massive X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Massive X in the language / languages: English as an attachment in your email.

The manual is 12,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info