802455
13
Zoom out
Zoom in
Previous page
1/71
Next page
13
Network
Network Options
Always on: The WLAN function remains switched on (faster access when switching from other modes of radio).
Auto off in 30s: The WLAN function shuts down after 30 seconds when not in use (to save energy).
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between different countries.
Therefore, it is necessary to choose the Wi-Fi channels to ensure the Wi- Fi performs satisfactorily.
The channels are already set according to the requirement in different countries. Choose the country you are staying
in from the list to get the correct channel.
Add / Remove AP
Add AP (scan) - It will scan out a list of routers around.
Add AP (WPS button) - Choose this option to connect your Wi-Fi router via WPS (if the router has a WPS button).
Remove AP - If you have already added a router and want to remove it, choose this option.
Note: It is recommended to place the radio within 2 meters from the router for better success rate.
AP
If you have added more than one router to the radio and want to switch to another one, select this option to change.
Signal
This is to show the strength of the Wi-Fi signal as received by the radio. Usually signal levels lower than -70dBm is
classed as weaker level and if it affects the reception of your radio, you may need to optimize the router location or
check if there is any problem with the router itself.
IP
The IP is set to Dynamic by default. Select to change Fixed IP according to your network condition.
DNS
The DNS is set to Dynamic by default. Select to change <Fixed> DNS according to your network condition.
Date and Time
The radio will set your local time automatically after the internet connection is completed. If you want to do manual setting,
change it by the following options:
Time zone
Auto-set Time Zone: This option is set by default.
Manual-set Time Zone: Choose this option if you want to set the time in another region.
Choose and highlight the region/city you prefer and press OK to confirm.
Coupled with NTP (use network time) and DST (Daylight Saving Time) will be adjusted automatically if you choose to
use network time (NTP).
Set Time Format
Choose either 12-hour or 24-hour notation you prefer.
Set Date Format
DST (Daylight Saving Time)
Enable on/off
NTP (Use network time)
NTP is designed to synchronize a device's clock with a time server. Your radio will synchronize the time server by
default every time it powers up and connects to Internet.
This ensures a very high degree of accuracy in the radio's clock. You can change to use other time server by inputting
the URL address (see below NTP server). You can choose “Do not use network time” if you don't want it to.
If you choose not to use NTP for clock synchronization, highlight the NTP (Network Time Protocol) and press OK to
make the change. You will see the Set Date & Time appear on the menu. Select it and adjust the date and time as you
desire.
NTP Server
NTP is designed to synchronize a device's clock with a time server. Here it shows the server being used for the radio.
Language
The default language is set to English. You can choose other languages as preferred. Scroll with the [/] buttons on remote
or the [Tune/OK] knob to the symbol and press [OK]. Scroll to highlight and press [OK] to select your language of choice.
English, French, Spanish, Italian, German, Dutch, Polish, Russian and Simplified Chinese are available.
DAB set up
DAB full scan
You can always carry out a new scanning of DAB channels by selecting this option. All current presets and channels
will be erased.
DAB station list
The scanned DAB stations will be listed here for management. You can move the position of- or delete any station.
Scroll to the station and press []. A pop-up window will be presented: Move up, Move down and Delete.
FM set up
FM area
Choose the Region according to your physical location to define the search range for the radio.
Scan setting
Either "All stations" or "strong stations" (with stronger signal) can be selected for the scan.
Audio setting
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naples internet radio Internet radio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naples internet radio Internet radio in the language / languages: Dutch as an attachment in your email.

The manual is 1.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info