25
2. Push the pusher “B” to reset the small hand of the eve at 10 o’clock position.
After the pusher is pushed, the small sec hand will reach the “30” position
exactly.
3. Push the pusher “B” to reset the big sec. hand. When it moves close to the
11 o ‘clock position, adjust it by pushing the button sec by sec until it reaches
the 12 o’clock position exactly.
4. Push the pushers “A” and “B” simultaneously and hold for 2 seconds to de-
activate the reset mode.
SPLIT TIME MEASUREMENT FOR TIMING TWO RUNNERS:
1. Push the pusher “A” to start the timing of both runners.
2. Push the pusher “B” to split, the big sec. hand stops to show timing of the
first runner, but the timing continues internally.
3. Push again the pusher “B” to resume timing, and the hand moves quickly to
make up the elapsed time.
4. Push the pusher “A” to indicate the timing of the second runner.
ALARM
To set the alarm:
1. Pull crown to position “B”
2. Turn crown counter clockwise to set alarm (colour hand)
3. Push crown to position “A”
To activate the alarm:
1. Press pusher “C” to activate the alarm. Watch beeps twice
2. Press pusher “C” again to de-activate alarm. Watch beeps once
3. To stop alarm, press pusher “C” once
