707489
17
Zoom out
Zoom in
Previous page
1/22
Next page
15
UnitiQute 2 Integrated Amplifier
5 UnitiQute 2 Integrated Amplifier
UnitiQute 2 incorporates a high performance integrated preamplifier and power amplifier
based on established Naim design principles. The preamplifier is able to handle both
analogue and digital audio signals and, in addition to the UnitiQute 2 multi-format radio,
network interface and USB/iPod interface it has two external analogue and five external
digital inputs.
Using the UnitiQute 2 amplifier is simply a matter of selecting the desired input and setting
the listening volume level.
5.1 Selecting Inputs
Inputs can be selected by pressing the handset up (5)
and down (6) keys or one of the handset input selection
keys.
Note: The front panel input is automatically selected as
soon as a plug is inserted.
Pressing handset up (5) and down (6) keys scrolls through
and selects the inputs in the following order:
Analogue, Digital 1, Digital 2, Digital 3, Digital 4, FM (radio),
DAB (radio), iRadio, UPnP™ (Network UPnP™), USB/iPod,
Front (front panel analogue/digital).
Note: These are the default input names. They may be
altered within the UnitiQute 2 set up menus. See Section
4.3. Inputs can also be disabled so that they are hidden
from selection.
Pressing one of the handset input selection keys either
directly selects a single input or scrolls through a group
of inputs. For example, by default, pressing the CD input
selection key selects the Analogue input, while pressing the
radio input selection key scrolls through a group comprising
the FM, DAB and iRadio inputs.
Note: The default input selection key assignments may be
altered within the UnitiQute 2 set up menus. See Section
4.10.2.
Selecting an input will route that input’s audio signal to the
UnitiQute 2 outputs.
UnitiQute 2 will momentarily display input names as they
are selected before displaying input specific information;
iPod track or radio preset for example.
If an input is not operational (for example, no USB memory
stick is attached) when selected, UnitiQute 2 will display a
descriptive alert message.
5.2 Volume Control
UnitiQute 2 volume control is achieved by using the
handset vol– and vol+ keys or by continuously touching
the front panel Naim logo (the first touch increases volume,
the second touch decreases volume). The volume control
affects the speaker, headphone and preamplifier outputs.
Note: Switching off the Logo Mute function (see Section
4.8) will also switch off Logo volume control
The mute function silences the UnitiQute 2 speaker,
headphone, and preamplifier outputs and is engaged or
disengaged by touching the front panel logo or pressing
the handset mute key. Mute is indicated by the display
volume icon flashing.
5.3 Amplifier Display
In normal operation the UnitiQute 2 front panel display
primarily shows information relating to the selected input. It
will change temporarily to show amplifier adjustments such
as volume level and signal mute state as these are made.
5.4 Signal Outputs
In addition to its speaker outputs the UnitiQute 2 integrated
amplifier provides a preamplifier output, a digital output
and a headphone output.
The preamplifier output is designed to enable an upgrade
or additional power amplifier, or an active subwoofer to be
connected. The appropriate output configuration must be
selected through the Speakers setup menu. See Section
4.4.
The digital output enables UnitiQute 2 sources to be
connected to an external digital to analogue converter
or preamplifier with digital inputs. External analogue
sources (front Analogue and rear Analogue inputs) are not
available via the Digital Output. The digital output signal
format can be configured via the Digital Output setup
menu. See Section 4.7
Note: Although the UnitiQute 2 FM radio is fundamentally
an analogue source, the multi-mode radio module digitises
FM signals to make them available via the digital output.
The UnitiQute 2 headphone amplifier is able to drive
most commonly available headphones. Insertion of a
headphone plug will mute the UnitiQute 2 speaker and
preamplifier outputs.
5.5 Amplifier Fault Warnings
In the unlikely event that the UnitiQute 2 power amplifier is
overloaded, exceeds its normal operating temperature or
malfunctions, its output will mute and the display will show
a warning message.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim UnitiQute 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim UnitiQute 2 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim UnitiQute 2

Naim UnitiQute 2 User Manual - German - 22 pages

Naim UnitiQute 2 User Manual - French - 22 pages

Naim UnitiQute 2 User Manual - Italian - 22 pages

Naim UnitiQute 2 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info