707489
13
Zoom out
Zoom in
Previous page
1/22
Next page
11
UnitiQute 2 Setup
frequency component of a speaker system incorporating
small (restricted bandwidth) satellite speakers. When
Small is specified, a 100Hz high-pass filter is applied to the
UnitiQute 2 speaker output signal.
Select None when no speakers are connected directly to
the UnitiQute 2
Engaging the Loudness option applies low frequency boost
to the speaker and preamplifier outputs that decreases as
the volume setting is increased. Through compensating for
the ear’s reduced low frequency sensitivity at low volume
levels, the Loudness function can make low volume
listening more satisfying.
Note: The loudness contour operates at volume settings
between 0 and 55.
The speaker Max. Volume and Balance parameters specify
maximum allowed volume, and the channel balance
respectively.
4.5 The Headphones Menu
The Headphones setup menu
enables the Max. Volume
parameter to be specified:
Parameter Options
Max. Volume: 0 to 100 (adjust
using handset 6
or 5 keys)
4.6 The Network Settings Menu
The Network Settings menu
enables UnitiQute 2 network
parameters to be customised
to suit the router and network.
The options are tabulated
and described in the following
sections:
Parameter Options
Name: User definable (text entry)
Default: Uniti-xxxx
Wireless: Not Used / Wireless Network Names
Status: Connected / No Signal / Login Failure /
Busy / Etc.
DHCP: Yes / No
The Name parameter enables the UnitiQute 2 default
network name to be changed.
The Wireless parameter enables a wireless network to be
chosen and joined. See Section 4.6.1 below for detailed
wireless set up notes.
Network Status displays the current network connection
status.
The DHCP parameter enables the UnitiQute 2 network
settings to be modified. In most cases, specifying Yes and
leaving UnitiQute 2 set to DHCP, will be the appropriate
option. See Section 4.6.2 below for notes on non-DHCP
network connection.
Note: Devices installed on a network have an IP address
through which they are identified by all the other items
on the network. DHCP is a set of rules that enable the
automatic allocation of addresses as items are connected
(or switched on while connected) to the network.
UnitiQute 2 is set up by default to use DHCP.
Note: If UnitiQute 2 is connected to the network both
wirelessly and via Ethernet (wired), the Ethernet connection
will take priority.
4.6.1 Wireless Network
Connection Set Up
If the Wireless parameter is
selected in the Network Settings
menu the Select Network menu
will display a list of the available
networks. An option not to use a wireless connection is
also provided. Use the handset up (5) or down (6) keys
to scroll through the list and the ok/list key to select a
network.
Note: UnitiQute 2 is compatible with most commonly used
Wi-Fi standards. Routers that support 802.11b and 802.11g
will work, however those with 802.11n compatibility are
recommended for best results.
Note: As with any wireless network hardware, UnitiQute
2 connection reliability will be affected by both network
router performance and Wi-Fi signal quality. To minimise
the possibility of poor connection reliability, UnitiQute 2
should be connected to network audio sources by no
more than one wireless “leg”. Other “legs” necessary
between UnitiQute 2 and the network audio sources
should be wired.
Note: UnitiQute 2 cannot connect to a “hidden” wireless
network.
If the selected network is secure
and requires a passphrase or
access key to join, UnitiQute 2 will
display an alert message. Pressing
the handset ok/list key will then
open a text entry screen for entry
of the passphrase or access key.
Use the handset numeric/text
keys to enter the passphrase or
access key taking care to ensure
that the letter case is correct.
Press the handset ok/list key
when text entry is complete. In
the illustration the passphrase is
“flatfish”.
If the network is successfully
joined UnitiQute 2 will display a
confirmation screen.
Network Settings 1/4
4Name: Uniti-0131
Wireless: Not Used
Status: Not Connected
DHCP Yes
Headphones 1/1
4Max. Volume: 100
Select Network 3/6
<Don’t Use Wireless>
LingNet
4GreenNet
TomNet
Now enter your wireless
passphrase or access key.
Press OK to continue
flatfish abc
flatfish
|
Press OK to confirm
Connected
Press OK To Finish
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim UnitiQute 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim UnitiQute 2 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim UnitiQute 2

Naim UnitiQute 2 User Manual - German - 22 pages

Naim UnitiQute 2 User Manual - French - 22 pages

Naim UnitiQute 2 User Manual - Italian - 22 pages

Naim UnitiQute 2 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info