707489
4
Zoom out
Zoom in
Previous page
1/22
Next page
2
UnitiQute 2 Installation and Connection
2.2 Mains Power Connection
Connect UnitiQute 2 to a mains power socket using either
the mains cable supplied or a Naim Power-Line.
2.3 FM/DAB Aerial Connection
In order to enable high quality FM and DAB radio,
UnitiQute 2 requires a, strong, interference-free radio signal.
Its rear panel FM/DAB Aerial socket must be connected,
via 75 Ohm low-loss coaxial cable, to a suitable aerial. The
aerial should be mounted clear of large obstructions and
as high as possible; ideally on a roof.
Note: Your local retailer should be able to offer advice on
a suitable aerial and aerial installer.
2.4 Audio Signal Connections
2.4.1 Audio Signal Inputs
UnitiQute 2 provides one USB input socket, two stereo
analogue inputs and five S/PDIF digital inputs including
one combined analogue/digital input socket. Connection
to the inputs is made via a variety of socket types. The
following table lists the inputs and their socket type:
Input Type Socket
rear panel Analogue RCA phonos
front panel Analogue 3.5mm jack
Digital 3.5mm mini-TosLink jack
dig. 1 Digital Coaxial (RCA phono)
dig. 2 Digital Optical (TosLink)
dig. 3 Digital Coaxial (RCA phono)
dig. 4 Digital Optical (TosLink)
USB Digital USB Type A
Note: The front panel analogue/digital jack socket can
accept both conventional analogue 3.5mm plugs and
mini-TosLink optical digital plugs. It will automatically
identify the type of plug inserted and handle the signal
appropriately.
Always use high quality interconnect cables to connect
sources to UnitiQute 2 inputs.
2 UnitiQute 2 Installation and Connection
UnitiQute 2 should be installed on an equipment stand intended for the purpose. Do not
stand it directly on top of another item of equipment and ensure it is well ventilated. Care
should be taken to ensure that it is level. It should be installed in its final location before
connecting cables or switching on. UnitiQute 2 has no standby mode and is intended to
be left switched on.
Connecting UnitiQute 2 to mains power and to a variety of audio peripherals and sources
is described in the following paragraphs. Diagram 2.1 illustrates the UnitiQute 2 rear panel
connection sockets.
2.1 UnitiQute 2 Rear Panel
mains input
and fuse
power
switch
signal
ground switch
preamp
output
network
socket
USB Update
socket
left
speaker
right
speaker
digital
output
analogue
input
digital inputs
1 & 3 (coaxial)
digital
inputs 2 & 4
(optical)
DAB/FM aerial
socket
wireless network (Wi-Fi)
antenna socket
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim UnitiQute 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim UnitiQute 2 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim UnitiQute 2

Naim UnitiQute 2 User Manual - German - 22 pages

Naim UnitiQute 2 User Manual - French - 22 pages

Naim UnitiQute 2 User Manual - Italian - 22 pages

Naim UnitiQute 2 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info