707487
21
Zoom out
Zoom in
Previous page
1/36
Next page
19
Speakers 1/3
4Amp Used: Internal Only
Max. Volume: 100
Balance: 0
Max. Volume: 0 to 100 (adjust using handset 6 or 5
keys)
Balance: -10 to + 10 (adjust using handset 6 or
5 keys)
Select the Large+Sub option when a subwoofer is
connected and used to augment the low frequency
performance of large (full bandwidth) speakers.
Select Large when no subwoofer is used (the NaimUniti 2
subwoofer output is switched o when Large is selected).
Select Small+Sub when a subwoofer is used to provide the
low frequency element of a speaker system incorporating
small (restricted bandwidth) satellite speakers. When
Small+Sub is specied, a 100Hz high-pass lter is applied to
the NaimUniti 2 speaker output signal.
Select None when no speakers are connected to the
NaimUniti 2 speaker outputs.
The speaker Max. Volume and Balance parameters specify
maximum allowed volume, and the channel balance
respectively.
UnitiLite • SuperUniti
Parameter Options
Amp Used: Internal Only
/ External / All
Outputs
Max. Volume: 0 to 100 (adjust using handset 6or 5
keys)
Balance: -10 to + 10 (adjust using handset 6or
5 keys)
Select Internal Only if no external amplier is to be used. The
preamplier output is disabled when Internal Only is selected.
Select External if an external power amplier is to be used
in place of the internal power amplier. The preamplier
output is enabled when External is selected.
Select All Outputs if an external power amplier or
subwoofer is to be used in conjunction with the internal
power amplier.
The speaker Max. Volume and Balance parameters specify
maximum allowed volume, and the channel balance
respectively.
4.6 The Headphones Menu
The Headphones setup menu
enables the Max. Volume parameter
to be selected:
Parameter Options
Max. Volume: 0 to 100 (adjust
using handset 6or 5 keys)
4.7 The Network Settings Menu
The Network Settings menu
enables network parameters to be
customised to suit the router and
network. The options are tabulated
and described in the following
sections:
Parameter Options
Name: User denable
Wireless: Not Used / Wi-Fi Network Name
Status: Connected / No Signal / Login Failure /
Busy / Etc.
DHCP: Yes / No
MAC: Displays the units MAC address
The Name parameter enables the units default network
name to be changed.
The Wireless parameter enables a wireless network to be
chosen and joined. See Section 4.7.1 below for detailed
wireless set up notes.
Network Status displays the current network connection
status.
The DHCP parameter enables the network settings to
be modied. In most cases, specifying Yes and leaving
the option set to DHCP will be the appropriate choice.
See Section 4.7.2 below for notes on non-DHCP network
connection.
Note: Devices installed on a network have an IP address
through which they are identied by all the other items
on the network. DHCP is a set of rules that enable the
automatic allocation of addresses as items are connected
(or switched on while connected) to the network. All Uniti
series products are congured by default to use DHCP.
Note: If a Uniti Series product is connected to a network
both wirelessly and via a wired connection, the wired
connection will take priority.
4.7.1 Wireless Network
Connection Set Up
If the Wireless parameter is selected
in the Network Settings menu the
Select Network menu will display
a list of the available networks. An option not to use a
wireless connection is also provided.
Note: Uniti Series products are compatible with the most
commonly used Wi-Fi standards. Routers that support
802.11b and 802.11g will work, however those with 802.11n
compatibility are recommended for best results.
Select Network 3/6
<Don’t Use Wireless>
LingNet
4GreenNet
TomNet
Network Settings 1/5
4Name: Lite-0131
Wireless: Not Used
Status: Not Connected
DHCP Yes
4. Configuration
Headphones 1/1
4Max. Volume: 100
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim SuperUniti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim SuperUniti in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim SuperUniti

Naim SuperUniti User Manual - German - 24 pages

Naim SuperUniti User Manual - Dutch - 24 pages

Naim SuperUniti User Manual - French - 24 pages

Naim SuperUniti User Manual - Italian - 24 pages

Naim SuperUniti User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info