707487

Naim SuperUniti Manual

7
Zoom out
Zoom in
Previous page
1/36
Next page
5
2. Installing and Connecting
2.3 Speaker Outputs
A set of stereo speaker connection sockets is provided
on your Uniti Series product rear panel. Custom Naim
Audio loudspeaker connectors are supplied to make the
connection, and in order to comply with current European
safety regulations these should always be used. Naim Audio
speaker cable will provide the best results, however, a range
of speaker cable types may be used without risk. Contact
your local Naim retailer for further advice. Use equal lengths
of speaker cable for each channel.
Ensure when connecting speakers that they are “in phase”.
That is, the positive and negative connection orientation at
both the speaker and amplier ends of the cable is the same
for both channels.
2.4 Headphone Output
Uniti Series products are tted on their front panels with a
stereo headphone socket. Insertion of a headphone plug will
mute the speaker outputs.
Note: Uniti Series products control and store volume
settings separately for headphones and speakers.
2.5 DAB/FM Aerial Connection
The Uniti Series DAB/FM tuner module requires a strong,
interference-free signal to enable high quality FM and
DAB reproduction. The rear panel DAB/FM Aerial socket
should be connected, via 75 ohm low-loss coaxial cable, to a
suitable aerial. The aerial should be mounted clear of large
obstructions and as high as possible; ideally on a roof.
Note: Your local retailer should be able to oer advice on
a suitable aerial and aerial installer.
2.6 Signal Ground Switch
Your Uniti Series product is tted on its rear panel with a
Signal Ground switch oering two positions: Chassis or
Floating. Select the Chassis position unless your Uniti Series
product is connected in a hi- system incorporating another
earthed source component, or mains “hum” is audible
through the loudspeakers. Contact your retailer, distributor
or Naim for advice if necessary.
Note: “Connected” in the context above means an
analogue audio signal cable that includes an earth
connection.
Note: All Naim CD players are earthed so the Signal
Ground switch should be set to oating if one is
connected in the system.
No damage will be done if the wrong Signal Ground position
is chosen, however the system sound quality may be
compromised.
Note: Uniti Series analogue input and output negative
connections for each channel are common. The mains
earth (ground) should always be connected regardless of
what other equipment is used. The mains earth primarily
grounds the case and the electrostatic screen within the
transformer, and is only connected to the signal negative
if the Signal Ground switch is set to Chassis. In order to
avoid hum loops, the signal negative of the whole system
should be connected to the mains earth in one place only.
2.7 USB Interface
Uniti Series products are tted with a front panel USB
interface intended for the connection of USB memory sticks
carrying audio les. The USB interface should not be used
for any other purpose.
Note: Most UMS (Universal Mass Storage) USB memory
sticks are compatible with the Uniti Series USB audio
interfaces. Other UMS devices might include portable
digital music players, smart-phones, tablet computers
and memory card readers. Non-UMS USB devices, such
as older MP3 players, may be connected to a Uniti Series
product analogue audio input from their headphone
sockets. See Section 8 for more information.
2.8 Network Connections
2.8.1 Wired Network Connection
Uniti Series products are tted on their rear panels with a
standard RJ45 Ethernet socket. This socket enables them to
join home networks via a network router to access internet
radio streams, to play audio les stored on UPnP™ servers,
to play Spotify
®
Connect and TIDAL streams, and to play
from or broadcast to other Naim streamers on the same
network.
Note: Ethernet-over-mains hardware may be used and
provides a simple and convenient method of wired home
network connection. However, depending on mains wiring
factors specic to each home environment, the presence
of network data on the mains supply may compromise
overall system sound quality. If any sound quality
compromise is found to be unacceptable, dedicated
network cabling should be installed as the preferred
option, or alternatively wireless networking can be
employed.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim SuperUniti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim SuperUniti in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim SuperUniti

Naim SuperUniti User Manual - German - 24 pages

Naim SuperUniti User Manual - Dutch - 24 pages

Naim SuperUniti User Manual - French - 24 pages

Naim SuperUniti User Manual - Italian - 24 pages

Naim SuperUniti User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info