707504
15
Zoom out
Zoom in
Previous page
1/22
Next page
E13
12. NAIT 5si
The NAIT 5si is a very high performance stereo integrated amplier that combines a preamplier providing four line-level
analogue inputs with a power amplier rated at 60 Watts per channel. The NAIT 5si can be controlled by either its remote
handset or by a front panel mounted volume knob and input selection buttons. The NAIT 5si remote handset is described in
Section 15 of this manual. A front panel 6.3mm jack socket enables the use of headphones with the NAIT 5si.
Your NAIT 5si should be installed on a dedicated equipment stand intended for the purpose. Do not stand it directly on top
of another item of equipment. Care should be taken to ensure that it is level. The amplier should be installed in its nal
location before connecting cables or switching on. Ensure that the volume is turned down before switching on.
12.1 Mains Power Connection
Connect the NAIT 5si to a mains power socket using either
the mains cable supplied or a Naim Power-Line.
12.2 Signal Inputs
The front panel input selector buttons select the source
input signal to be routed to the power amplier and
the loudspeakers or headphones. The four buttons are
labelled cd, tuner, hdd (hard disk drive) and av. Each input
button corresponds to a pair of rear panel RCA phono
input sockets. The cd and tuner inputs are additionally
provided with parallel DIN sockets. These should be used
in preference to the RCA phono sockets if practical. Do not
connect both the DIN and RCA phono sockets of one input
simultaneously.
12.3 Speaker Outputs
A stereo set of speaker connection sockets is provided
on the rear panel. The sockets can accept standard 4mm
plugs, but to comply with European legislation the Naim
connectors supplied should be used. Naim Audio speaker
cable will provide the best results; however, a wide range of
speaker cable types can be used without risk of damage to
the amplier.
Ensure when connecting speakers that they are “in phase.
That is, the positive and negative connection orientation at
both the speaker and amplier ends of the cable is the same
for both channels.
12.4 hdd Output
The NAIT 5si hdd input has an associated output that enable
the selected input signal to be routed externally; to an audio
recording component for example.
Note: The hdd output remains active regardless of which
input is selected. Take care that a feedback loop is not
inadvertently created by the simultaneous selection of
input and output. The hdd output will be silenced when
mute is engaged.
12.5 Headphone Output
The NAIT 5si headphone output is able to drive the majority
of headphone types. The 6.3mm (1/4”) jack socket, rather
than the smaller 3.5mm jack socket, provides more reliable
connection and potentially higher sound quality. Most
high-quality headphones are supplied with an adaptor that
enables use with either 3.5mm or 6.3mm jack sockets.
Inserting a headphone plug will mute the NAIT 5si speaker
outputs. Removing the headphone plug will restore the
outputs.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim SUPERNAIT 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim SUPERNAIT 3 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim SUPERNAIT 3

Naim SUPERNAIT 3 User Manual - German - 22 pages

Naim SUPERNAIT 3 User Manual - Dutch - 22 pages

Naim SUPERNAIT 3 User Manual - French - 22 pages

Naim SUPERNAIT 3 User Manual - Italian - 22 pages

Naim SUPERNAIT 3 User Manual - Polish - 22 pages

Naim SUPERNAIT 3 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info