707503
6
Zoom out
Zoom in
Previous page
1/22
Next page
E4
Note: The AV Bypass feature must be used with care. It
bypasses the SUPERNAIT 2 volume control leaving any
signal connected to the av input to be passed to the
speakers at full volume.
Note: Inserting a headphone plug while AV Bypass
mode is selected temporarily returns the SUPERNAIT 2
to normal operation. Removing the headphone plug will
return the SUPERNAIT 2 to AV Bypass mode.
Note: The mute function is disabled when AV Bypass
mode is engaged.
4.7 Other Signal Inputs and Outputs
The SUPERNAIT 2 incorporates DIN bi-amp (output), RCA
phono sub out, DIN pre-amp out, and DIN power-amp in
sockets on its rear panel. In normal use the pre-amp out and
power-amp in sockets are connected by a link plug. The link
plug should be removed only in the following circumstances:
A power supply upgrade is to be used.
An alternative preamplier is to be used with the
SUPERNAIT 2 power amplier. See Section 4.8
An alternative power amplier is to be used with the
SUPERNAIT 2 preamplier.
Note: The power amp in socket carries a 24V DC power
supply output intended for Naim preampliers that
require an external power supply.
The SUPERNAIT 2 DIN bi-amp output socket provides a
preamp output signal that enables a second power amplier
to be used in conjunction with the SUPERNAIT 2 power
amplier.
The RCA phono sub out sockets provide a stereo output
intended for connection to an active subwoofer. The output
signal is a duplicate of the preamplier output. No low-pass
ltering is applied.
Diagrams 6.1,and 6.2 illustrate some applications of the
SUPERNAIT 2 preamp out, power amp in and bi-amp
sockets.
4.8 Power Amp Mode Operation
If a SUPERNAIT 2 is to be used as a stereo power amp only it
must be congured to operate in power amp mode:
With the SUPERNAIT 2 switched o, remove its rear
panel link plug and connect the interconnect cable
from the preamp or preamp power supply to the power
amp in socket
Switch on the SUPERNAIT 2. The mute button will
ash to indicate that the link plug has been removed.
Press and hold the mute button until it extinguishes.
The SUPERNAIT 2 is now in power amp mode. Its
volume control indicator and button illumination will
extinguish.
To return the SUPERNAIT 2 to normal operation, switch
it o, replace the link plug and switch it on again.
4.9 Power Supply Upgrades
The SUPERNAIT 2 preamplier can be upgraded through
the connection of an external Flatcap, Hi-Cap or Supercap
power supply. The SUPERNAIT 2 and external power
supply must be switched o when connections are made.
Switch on the external power supply rst followed by the
SUPERNAIT 2 when all connections are complete.
4.10 General Connections Notes
The SUPERNAIT 2 negative input and output connections for
each channel are common. The mains earth (ground) should
always be connected regardless of what other equipment is
used in conjunction with the amplier. The mains earth only
grounds the case and the electrostatic screen within the
transformer, and is not connected to the signal negative. In
order to avoid hum loops, the signal negative of the whole
system should be connected to the mains earth (ground) in
one place.
A signal ground connection is tted to the SUPERNAIT
2 rear panel. This is intended to be used to connect a
turntable pick-up arm signal earth only.
4.11 External Control and Interface
The SUPERNAIT 2 is tted on its rear panel with a 3.5mm
jack Remote In socket and a mini-USB interface socket.
The Remote In socket can be used for RC5 remote control
of the SUPERNAIT 2 via a wired connection or a remote IR
repeater.
The mini-USB socket enables rmware upgrades and
diagnostic tests to be carried out. Contact your Naim
retailer for more information if required.
Note: The mini-USB interface is not intended for the
connection of USB memory devices.
SUPERNAIT 2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim SUPERNAIT 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim SUPERNAIT 2 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim SUPERNAIT 2

Naim SUPERNAIT 2 User Manual - German - 22 pages

Naim SUPERNAIT 2 User Manual - Dutch - 22 pages

Naim SUPERNAIT 2 User Manual - French - 22 pages

Naim SUPERNAIT 2 User Manual - Italian - 22 pages

Naim SUPERNAIT 2 User Manual - Polish - 22 pages

Naim SUPERNAIT 2 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info