707511
11
Zoom out
Zoom in
Previous page
1/20
Next page
3.3 NAP S1 AUDIO OUTPUTS AND CONNECTIONS
Each NAP S1 power amplifier incorporates a single speaker output located on its connection panel.
This is illustrated in Diagram 3.2.
Nim speaker cable should be used with NAP S1 power amplifiers. Alternative speaker cables are
technically compatible the NAP S1 however the NAP S1 was specifically designed to be used with
Nim cable and it will provide the best results. Your Nim retailer will be able to make-up speaker
cables terminated with the appropriate hardware and of the required length.
The NAP S1 speaker output terminals can accept Nim Statement speaker connection plugs,
standard 4mm plugs, or spade connectors. If either Statement speaker plugs or standard 4mm
plugs are to be used they can be inserted directly into the socket aperture. If spade connectors
are to be used, the NAP S1 speaker terminals must be loosened, and re-tightened once the spade
connectors are in place. To loosen a NAP S1 speaker terminal, first pull its red or black coloured
cap away from the brass nut beneath, then use the supplied wrench to turn the nut. Replace the
coloured cap when the nut is re-tightened.
WARNING. The NAP S1 can generate output voltages high enough to cause mild electric shock.
Ensure that the NAP S1 is switched off before touching its output terminals.
Ensure when connecting speakers that they are “in phase”; that is, the positive and negative
connection orientation at both the speaker and power amplifier ends of the cable is the same
for both channels.
N O T E . The NAP S1 speaker terminals are labelled “hot” and “cold”. Hot is equivalent to positive in a
conventional amplifier and cold is equivalent to negative. Hot and cold are used rather than negative and
positive because the NAP S1 is a bridged amplifier design in which both terminals are “active”. In a
conventional amplifier, only the positive terminal is active the negative terminal is connected to the
system earth.
E2378
3.2 NAP S1 CONNECTION PANEL
Control:
RJ45: CAN bus x 2
Jack: Trigger in x 1
Trigger out x 1
USB: Firmware update
Balanced XLR input
Speaker output
Mains power
Power switch
3.0 NAP S1 POWER AMPLIFIERS
20 21
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAP S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAP S1 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAP S1

Naim NAP S1 User Manual - German - 38 pages

Naim NAP S1 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info