707511
5
Zoom out
Zoom in
Previous page
1/20
Next page
1.0 INSTALL ATION
The following Section 1 paragraphs refer to both the NAC S1 preamplifier and NAP S1
power amplifiers.
1.1 POSITIONING
WARNING. Statement amplifiers are extremely heavy and to minimise the risk of damage or
personal injury they should be lifted and moved by at least three people working together.
Your Statement preamplifier and power amplifiers can generally be positioned in your listening
room as convenience dictates. There are however some constraints to consider:
For best performance Statement amplifiers should ideally be connected directly
to wall-mounted mains outlet sockets using only the supplied PowerLine mains cables.
Each Statement unit must therefore be located within 1m of a mains outlet socket.
If a NAC S1 preamplifier is to be used with a Nim 500 Series or Classic Series power amplifier
(most likely a NAP 500 or NAP 300), the distance between the NAC S1 and the power amplifier
will be constrained by the 1m interconnect cable length.
If a NAC S1 preamplifier is to be used with NAP S1 power amplifiers, the distance between
the preamplifier and power amplifiers is less constrained by interconnect cable length.
The supplied interconnect cables are 560mm long, however cables of up to 10m length may
be used. Your Nim retailer will be able to supply cables made-up to the required length.
NOTE. One of each pair of NAP S1 power amplifiers is nominated as the “left” power amplifier and
one nominated as the “right” power amplifier. Left (L) and right (R) identification can be found on NAP S1
connection panels. Ensure when positioning a pair of NAP S1 power amplifiers that each one is sited
appropriately for connection to its left and right inputs and outputs.
IMPORTANT NOTE. The NAC S1 has setup buttons and indicators located on its connection
panel. Ensure the connection panel is accessible following installation to enable configuration.
8 9
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAP S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAP S1 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAP S1

Naim NAP S1 User Manual - German - 38 pages

Naim NAP S1 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info