707509
28
Zoom out
Zoom in
Previous page
1/44
Next page
E26
NAIT 5i Integrated Amplifier
25 NAIT 5i Introduction and Installation
The Nait 5i should be installed on a dedicated equipment stand intended for the
purpose. Do not stand it directly on top of another item of equipment. Care should
be taken to ensure that it is level. The amplifier should be installed in its final location
before connecting cables or switching on. Ensure that the volume is turned down before
switching on.
The following Section 25 paragraphs describe installation features and functions specific
to the Nait 5i. Operational features common to all preamplifiers and integrated amplifiers
are described in Section 28.
25.1 Inputs
The front panel input selector buttons select the source
input signal to be routed to the power amplifier and the
loudspeakers. The four buttons are labelled cd, tuner, hdd
and av. Each input button corresponds to a pair of rear
panel RCA Phono input sockets. The cd and tuner inputs
are additionally provided with alternative DIN sockets.
These should be used in preference to the RCA Phono
sockets if practical. Do not connect both the DIN and
RCA Phono sockets of one input simultaneously.
A 3.5mm stereo Jack input socket suitable for an iPod* (or
alternative portable music player) on is also provided on
the Nait 5i front panel.
Insertion of a plug into the front panel socket will
automatically switch the preamplifier to that input.
Removal of the plug will return the amplifier to the
previously selected input.
Note: The mute function will not operate when the front
panl input is in use.
25.2 Outputs
A stereo set of speaker connection sockets is provided
on the rear panel. The sockets can accept standard
4mm plugs, but to comply with European legislation the
Naim connectors supplied should be used. Naim Audio
speaker cable will provide the best results; however, a wide
range of speaker cable types can be used without risk of
damage to the amplifier.
Ensure when connecting speakers that they are “in
phase”. That is, the positive and negative connection
orientation at both the speaker and amplifier ends of the
cable is the same for both channels.
The hdd output always carries the selected input signal.
volume
source selection
26 NAIT 5i Controls and Connections
26.1 NAIT 5i Front
Operational features
common to all
preamplifiers and
integrated amplifiers
are described in
Section 28
front panel
input socket
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAP 300 DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAP 300 DR in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAP 300 DR

Naim NAP 300 DR User Manual - English - 16 pages

Naim NAP 300 DR User Manual - German - 44 pages

Naim NAP 300 DR User Manual - French - 44 pages

Naim NAP 300 DR User Manual - Italian - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info