707507
13
Zoom out
Zoom in
Previous page
1/44
Next page
E11
NAC 202 Preamplifier
13 NAC 202 Introduction and Installation
The NAC 202 preamplifier does not incorporate an internal power supply but must be
used in conjunction with either a Naim power amplifier incorporating a preamplifier
power output, or with an appropriate Naim power supply. A separate NAPSC supply that
provides power to the display and control circuits is also available. Diagram 14.3 illustrates
the NAC 202 connected to a Hi-Cap power supply.
The preamplifier and any power supply should be installed on a dedicated equipment
stand intended for the purpose. Do not stand either directly on top of another item of
equipment. Care should be taken to ensure that the preamplifier is level.
The preamplifier and any power supply should be installed in their final locations before
connecting cables or switching on. Ensure that the preamplifier volume is turned down
before switching on.
The following Section 13 paragraphs describe installation features and functions specific
to the NAC 202. Operational features common to all preamplifiers and integrated
amplifiers are described in Section 28.
13.1 Input Sockets and Assignment
The input selection buttons select the source input signal to
be routed to the power amplifier and the loudspeakers.
The NAC 202 has six DIN input sockets and two alternative
pairs of RCA Phono sockets. The RCA Phono sockets can
be assigned individually to the CD and AUX 2 input buttons
in place of the DIN sockets.
Input assignment setup is accessed through the NAC
202 program mode. To switch into (or exit from) program
mode press and hold the prog key on the remote handset
(in preamplifier mode). Program mode is indicated by a
flashing indicator on the front panel volume control.
Note: If no function is operated within five minutes of
entering program mode the NAC 202 will return to normal
mode automatically.
Once in program mode press and hold the remote
handset 1 button to select or de-select the RCA Phono
socket input for CD, and the remote handset 6 button to
select or de-select the RCA Phono socket input for AUX 2.
The corresponding front panel input buttons can similarly
be used to select or de-select the RCA Phono socket
inputs. The appropriate input button indicator will flash
three times on selection of the RCA Phono option and
once on selection of the DIN option.
To exit from program mode press and hold the prog key on
the remote until the volume indicator stops flashing.
13.2 Record Mute
In order to minimise power consumption and improve
sound quality the NAC 202 record output circuit can
be muted. To engage or disengage record mute press
the front panel mon button followed by the front panel
mute button. The mute button indicator will illuminate
when record mute is engaged and extinguish when it is
disengaged. Record mute can also be engaged and
disengaged from the remote handset using the mon and
mute keys.
volume
mute
mon
source selection
14 NAC 202 Controls and Connections
14.1 NAC 202 Front
Operational features
common to all
preamplifiers and
integrated amplifiers
are described in
Section 28
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAP 200 DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAP 200 DR in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAP 200 DR

Naim NAP 200 DR User Manual - English - 16 pages

Naim NAP 200 DR User Manual - German - 44 pages

Naim NAP 200 DR User Manual - French - 44 pages

Naim NAP 200 DR User Manual - Italian - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info