707502
17
Zoom out
Zoom in
Previous page
1/22
Next page
E15
NAIT 5si
Automatic Input Switching only becomes operational on exit
from program mode by pressing and holding the handset
prog key.
Note: The NAIT 5si will leave program mode automatically
if no control commands are received for ve minutes.
Note: In a few cases some further equipment
conguration may be required for auto switching to
operate correctly. Please contact your retailer or local
distributor for advice.
14.2 AV Bypass
The NAIT 5si can be integrated within a multi-channel home
theatre system, driving the front left and right channel
speakers, by engaging its AV Bypass mode. AV Bypass mode
enables a home theatre processor to take over volume control
of signals connected to the NAIT 5si av input.
To select AV Bypass, rst switch the NAIT 5si into program
mode by pressing and holding the handset prog key (with
the handset in preamplier mode). The front panel av button
will illuminate if AV Bypass is selected. If it is not enabled it
can be switched on by pressing av button twice.
The NAIT 5si volume control indicator will extinguish when
AV Bypass mode is engaged and the av input is selected.
Remote handset volume control and mute function will also
be disabled.
Note: The AV Bypass feature must be used with care. It
bypasses the NAIT 5si volume control leaving any signal
connected to the av input to be passed to the speakers at
full volume.
Note: Inserting a headphone plug while AV Bypass mode
is selected temporarily returns the NAIT 5si to normal
operation. Removing the headphone plug will return the
NAIT 5si to AV Bypass mode.
Note: The mute function is disabled when AV Bypass
mode is engaged.
14.3 Handset Volume Control
The remote handset volume keys provides some alternative
control characteristics. A short press and release of a key
will adjust by a preset “nudge, while pressing and holding
the key will result in three seconds of slow adjustment
followed by continual fast adjustment.
Note: The NAIT 5si does not incorporate any facility for
channel balance adjustment.
14.4 Mute
Mute silences the outputs and can be selected or
deselected by pressing the remote handset mute key.
14.5 Display
The NAIT 5si front panel button illumination can be
switched o by pressing the remote handset (in preamplier
mode) disp function. Any subsequent handset or front panel
operation will temporarily restore the display. A second
operation of the disp function will restore the display.
14.6 Remote Control
The NARCOM 5 remote handset supplied with the
NAIT 5si duplicates all conguration and control functions.
See Section 15 for more information.
14.7 Defaults
To restore all NAIT 5si programmable settings to the factory
defaults press and hold the remote handset disp key while
the unit is in program mode. The NAIT 5si will exit from
program mode following this operation.
14.8 Fault Conditions
The NAIT 5si will indicate fault conditions by ashing front
panel button buttons. The following table lists the fault
indications.
Fault Flashing Button
Excess Temperature cd
Excess Current tuner
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAIT XS 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAIT XS 3 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAIT XS 3

Naim NAIT XS 3 User Manual - German - 22 pages

Naim NAIT XS 3 User Manual - Dutch - 22 pages

Naim NAIT XS 3 User Manual - French - 22 pages

Naim NAIT XS 3 User Manual - Italian - 22 pages

Naim NAIT XS 3 User Manual - Polish - 22 pages

Naim NAIT XS 3 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info