707494
8
Zoom out
Zoom in
Previous page
1/32
Next page
6
2. Installing and Connecting
2.7.3 Network Settings
NAC-N preampliers are set up when originally shipped
not to require any network conguration but to connect to
networks automatically (DHCP is used by default). However,
if your NAC-N preamplier has been previously used, its
network conguration may have been altered leaving it
unable to connect automatically. If this appears to be the
case ensure that DHCP is selected in the Network Settings
menu and re-start the unit. If the problem still persists
carry out a Factory Reset operation (by selecting Reset All
Settings from the Factory Settings setup menu) and try
again.
Note: Wireless conguration data and user radio presets
will be deleted during the Factory Reset operation.
2.8 Bluetooth
NAC-N preampliers are able to play Bluetooth audio
streams from Bluetooth capable devices incorporating
an appropriate audio playback app. The Bluetooth aerial
supplied must be tted to the rear panel Bluetooth aerial
socket.
Note: The Bluetooth aerial is the shorter of the two
supplied.
2.9 System Automation
NAC-N preampliers can be linked using System
Automation to control some Naim CD players. This enables
a Naim CD player to be controlled from the Naim iOS and
Android app.
To take advantage of System Automation, connect the
NAC-N preamplier rear panel Remote Out socket to the
CD player Remote In socket. Use a cable terminated with a
3.5mm jack plug at one end and a 3.5mm jack or phono plug
as necessary at the other end.
Note: Stereo and mono 3.5mm jack to 3.5mm jack can be
used for System Automation. If a stereo 3.5mm jack to
phono plug cable is used, connect the left channel phono
plug.
Note: System Automation is switched o by default. A full
description of its conguration and use can be found in
Section 4.12.
2.10 Control and Update Sockets
NAC-N preampliers are tted on their rear panels with
remote control and update interface sockets.
In addition to System Automation (see Section 2.9) the
Remote In and Out sockets can be used for RC5 remote
control via a wired connection or a remote IR repeater.
The Mini-USB socket enable rmware upgrades and
diagnostic tests to be carried out. Contact your Naim
retailer for more information if required.
Note: The mini-USB interface is not intended for the
connection of USB memory devices.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAC-N 272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAC-N 272 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAC-N 272

Naim NAC-N 272 User Manual - English, German - 12 pages

Naim NAC-N 272 User Manual - German - 32 pages

Naim NAC-N 272 User Manual - Dutch - 12 pages

Naim NAC-N 272 User Manual - Dutch - 32 pages

Naim NAC-N 272 User Manual - French, Italian, Polish - 12 pages

Naim NAC-N 272 User Manual - Polish - 33 pages

Naim NAC-N 272 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info