707484
7
Zoom out
Zoom in
Previous page
1/23
Next page
5
2. Network Connection
In order to play streamed audio les and internet radio
stations Mu-so and Mu-so Qb must be connected to the
internet via a local network router. Connection to the router
may be wired or wireless.
Note: Mu-so is congured by default to communicate
with home networks automatically using the standard
DHCP protocol. Mu-so can be congured to use a xed IP
address via is internal web setup pages. See Section 2.2
for more information.
Note: If your Mu-so has been previously used it is
good practice to return it to its default settings before
attempting to connect it to your network. The factory
default procedure will erase any existing user and network
settings and restore the default iRadio presets. See
Section 6.6 for more information.
The status indicator adjacent to the pin-hole button
illuminates to indicate dierent network and functional
states. The illumination is listed in the following table:
Illumination Network and Functional State
O Deep sleep/o
White Network connected
Orange No network
Orange (ashing) Network connection starting
Purple Wireless connection congured
but network not found
Purple (ashing) Wireless setup mode
Blue Firmware update underway or
unit in recovery mode
Red (ashing) System fault or amplier overload
(contact your retailer or Mu-so
support)
2.1 Wireless Network Connection
In order for Mu-so to connect to the internet via a local
wireless network it must be congured with the wireless
network name (SSID) and password (security key). There
are three dierent methods achieving this. The method
you choose will depend on personal preference and
convenience.
Note: Mu-so is compatible with the 802.11b and 802.11g
Wi-Fi standards.
Note: Mu-so cannot connect to a “hidden” wireless
network.
2.1.1: Wireless Setup Using the Naim App
The Naim App incorporates a wireless setup routine that
will guide you through the process of connecting Mu-so
wirelessly to your local network. If you have not already
downloaded and installed the Naim App you should do so
now. Follow the steps below to implement the Naim App
wireless setup routine.
Ensure that the iOS or Android device on which you
have installed the Naim App is connected to the same
wireless network you wish your Mu-so to use.
Open the Naim App and select Setup new Mu-so.
Follow the on-screen instructions to connect Mu-so to
the wireless network. Diagram 4 illustrates the Naim
App setup page.
Diagram 4
Naim App Welcome
screen
Rooms
Setup new Mu-so
The following Section 2 paragraphs are equally
applicable to both Mu-so and Mu-so Qb and describe
the procedures for wireless and wired connection.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim Mu-so 1st Generation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim Mu-so 1st Generation in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim Mu-so 1st Generation

Naim Mu-so 1st Generation User Manual - German - 24 pages

Naim Mu-so 1st Generation User Manual - Dutch - 24 pages

Naim Mu-so 1st Generation User Manual - French - 24 pages

Naim Mu-so 1st Generation User Manual - Italian - 24 pages

Naim Mu-so 1st Generation User Manual - Polish - 24 pages

Naim Mu-so 1st Generation User Manual - Portuguese - 24 pages

Naim Mu-so 1st Generation User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info